1、A.C.N. 006 893 232Holden LimitedEngineering DepartmentMATERIAL SPECIFICATIONNUMBERSHEETRELEASEREVISION:HN 22371 of 2October, 1996February, 2000NAME: FOAM - CLOSED CELL - HIGH TEMPERATURE RESISTANCETHIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TOTHE COMPANYS PRODUCTS THE RECIPIENT IS RESP
2、ONSIBLE TOCONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID.FORM : I:LABRTORYFORMSTDMATSPEC.DOC1SCOPEThe material defined by this specification is a closed cell polymeric foam withgood resistance to weather, oxidation and heat. The material has a substantialskin and a pressure sensitive acrylic adhesiv
3、e with a paper liner on one side.The service temperature range is -40 to 130 oC.2. PROPERTIES2.1 Colour black2.2 Hardness 45 3 Shore OO2.3 Tensile StrengthASTM D 412700 kPa min2.4 ElongationASTM D 412200 % min2.5 Compression Deflection30 % ASTM D 166722 3 kPa2.6 Water AbsorptionASTM D 10562 % by wgt
4、 max3. APPROVAL, INSPECTION AND REJECTIONRefer HN 1000, Clauses A AND C.4. HAZARDOUS MATERIALSRefer HN 1000, Clause H.5. RESTRICTED CHEMICALSRefer HN 1000, Clause J.A.C.N. 006 893 232Holden LimitedEngineering DepartmentMATERIAL SPECIFICATIONNUMBERSHEETRELEASEREVISION:HN 22372 of 2October, 1996Februa
5、ry, 2000NAME: FOAM - CLOSED CELL - HIGH TEMPERATURE RESISTANCETHIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TOTHE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TOCONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID.FORM : I:LABRTORYFORMSTDMATSPEC.DOC6. APPROVED SUPPLIERS AND MATERIALSAPPROVED SUPPLIER APPROVED MATERIALSouthcorp Packaging Unisil 6600 Series7. REFERENCESASTM D412 ASTM D1667 ASTM D1056 HN 10008. REVISIONSFebruary, 2000 -Editorial and Formatting changes.-Reference section added.Prepared by: Ron Boyack.
