ICONTEC 1191-1981 《机械产品 普通型棍棒》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 16052-1970 Reducer type unions for tube connections on internal cone Construction and dimensions《内圆锥管路连接用的直角异径管 结构及尺寸》.pdf

GOST 16053-1970 Union elbows for tube connections on internal cone Construction and dimensions《内圆锥管连接用弯管接头 结构和尺寸规格》.pdf

GOST 16054-1970 Flange union elbows for tube connections on internal cone Construction and dimensions《内圆锥管路连接用法兰弯头 结构及尺寸》.pdf

GOST 16055-1970 Flange union elbows with slope angle 135 for tube connections on internal cone Construction and dimensions《内圆锥管路连接用135倾斜角法兰弯头 结构及尺寸》.pdf

GOST 16056-1970 Flange union elbows hermetable for tube connections on internal cone Construction and dimensions《内圆锥管路连接用密封式法兰弯头 结构及尺寸》.pdf

GOST 16057-1970 Hermetable flange union elbows with slope angle 135 for tube connections on internal cone Construction and dimensions《内圆锥管路连接135倾斜角密封式法兰弯 头 结构及尺寸》.pdf

GOST 16058-1970 Union tees for tube connections on internal cone Construction and dimensions《内圆锥管路连接用直通三通 结构及尺寸》.pdf

GOST 16059-1970 Reducer type tees for tube connections on internal cone Construction and dimensions《内圆锥管路连接用异径三通 结构及尺寸》.pdf

GOST 16060-1970 Reducer type tees with thread diameter 14 mm on middle fitting for tube connections on internal cone Construction and dimensions《内圆锥管路连接用中间接头上带直径14mm螺纹异径三通 结构及尺寸》.pdf