ICONTEC 2012-1985 《冶金行业，最小流点为345 Mpa的低合金高抗性结构钢，相应厚度达到100mm》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 3952-4-1995 Simplified representation for kinematics - Part 4 Miscellaneous mechanisms and their components identical with ISO 3952-4 1984《运动学简易表示法 第4部分 混杂机构及其部件 等同采用 ISO 3.pdf

DIN ISO 3972-2013 Sensory analysis - Methodology - Method of investigating sensitivity of taste (ISO 3972 2011 + Cor 1 2012)《感官分析 方法学 味觉敏感性研究方法(ISO 3972-2011 + Cor 1-2012)》.pdf

DIN ISO 3995-1991 Metallic powders determination of green strength by transverse rupture of rectangular compacts identical with ISO 3995 1985《金属粉末 用矩形粉末压制坯块的横向断裂测定压坯强度》.pdf

DIN ISO 4003-1990 Permeable sintered metal materials determination of bubble test pore size identical with ISO 4003 1977《渗透性烧结金属材料 起泡试验孔隙大小的测定》.pdf

DIN ISO 4010-1978 Calibrating Nozzle Delay Pintle Type《道路车辆 延迟针阀式标定喷嘴》.pdf

DIN ISO 4030-1985 Road vehicles vehicle identification number (VIN) location and attachment《道路车辆 车辆识别号码(VIN) 位置和固定》.pdf

DIN ISO 4095-1980 Aerospace fasteners for aerospace construction bi-hexagonal wrenching configuration《航空和航天 宇航结构用紧固件 双六角(12角)扳手外形》.pdf

DIN ISO 4105-1984 Textile machinery and accessories wires for flexible card clothings《纺织机械和辅助装置 柔性梳理针布的金属丝》.pdf

DIN ISO 4113-1990 Road vehicles calibration fluid for diesel injection equipment identical with ISO 4113 1988《道路车辆 柴油发动机注油设备的校准流体》.pdf