IRAM 4008-N P -1948 《管状电容器纸 无线电接受类型》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C770-1998(2008) Standard Test Method for Measurement of Glass Stress&8212 Optical Coefficient《玻璃应力&8212测量的标准试验方法 光学系数》.pdf

ASTM C770-1998(2013) Standard Test Method for Measurement of Glass StressOptical Coefficient《玻璃应力测量的标准试验方法 光学系数》.pdf

ASTM C770-2016 Standard Test Method for Measurement of Glass StressOptical Coefficient《测量玻璃应力光学系数的标准试验方法》.pdf

ASTM C771-2003 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes《预制封缝带受热老化后重量损失的标准试验方法》.pdf

ASTM C771-2003(2009) Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes《预制封缝带受热老化后重量损失的试验方法》.pdf

ASTM C771-2014 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants《预制密封带受热老化后重量损失的标准试验方法》.pdf

ASTM C772-2003 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants《预制封缝带泛油或增塑剂泛出的标准试验方法》.pdf

ASTM C772-2003(2009) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants《预制封缝带泛油或增塑剂泛出的标准试验方法》.pdf

ASTM C772-2003(2014) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants《预制封缝带泛油或增塑剂泛出的标准试验方法》.pdf