IRAM 609-1958 《焊接中镕制焊缝以及纯焊的机械试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 7208-2008 Skimmed milk whey and buttermilk - Determination of fat content - Gravimetric method (Reference method)《脱脂乳、乳清和乳酪 脂肪含量的测定 重量分析法(基准方法)》.pdf

BS EN ISO 7214-2012 Cellular plastics Polyethylene Methods of test《泡沫塑料 聚乙烯 试验方法》.pdf

BS EN ISO 7231-2010 Polymeric materials cellular flexible - Determination of air flow value at constant pressure-drop《高聚物多孔弹性材料 恒定压降下的气流值的测定》.pdf

BS EN ISO 7233-2016 Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum《橡胶、塑料软管和软管组件 耐真空度的测定》.pdf

BS EN ISO 7235-2009 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss flow noise and total pressure loss《声学 风道消音装置和风道末端装置的实.pdf

BS EN ISO 7243-2017 Ergonomics of the thermal environment Assessment of heat stress using the WBGT (wet bulb globe temperature) index《热环境的人机工程学 用湿球温度指数评估热应力》.pdf

BS EN ISO 7250-1-2017 Basic human body measurements for technological design Body measurement definitions and landmarks《工艺设计用基本人体测量 人体测量定义和标志》.pdf

BS EN ISO 7263-2011 Corrugating medium Determination of the flat crush resistance after laboratory fluting《瓦楞芯纸 实验室起瓦楞后耐平压性的测定》.pdf

BS EN ISO 7278-1-1990 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - General principles《液态烃 动态测量 容积计量计正系统 第1部分 一般原理》.pdf