IS 13863-1993 Cereals and milled cereal products Determination of the viscosity of flour Method using an amylograph.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CNS 13159-1995 Method of Test for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipes for Water Works《自来水用丙烯睛─丁二烯─苯乙烯（ABS）塑料管检验法》.pdf

CNS 13160-1993 Information Processing - Representation of SI and Other Units in Systems with Limited Character Sets《信息处理─有限字符集系统中国际单位制及其它单位制表示法》.pdf

CNS 13161-1993 Codes for Units of Measurement Used in International Trade《使用于国际贸易的计量单位代码》.pdf

CNS 13162-1993 Form of Proposals for the Establishment of Standards《制定标准建议书格式》.pdf

CNS 13163-1993 Method of Soundness Test for Fillet Welds《填角熔接部之无瑕疵试验法》.pdf

CNS 13164-1993 Method of Tension Shear Test for Spot Welded Joints《点熔接接合之拉剪试验法》.pdf

CNS 13165-1993 Method of Macro Test for Section of Spot Welded Joints《点熔接接合之断面巨观试验法》.pdf

CNS 13166-1993 Inspection for Flash Welds (Steel)《闪电熔接部之检验法（钢）》.pdf

CNS 13167-1993 Safety Standards for Construction of Spindle Shapers《立轴机之构造安全基准》.pdf