IS 2705 Pt 2-1992 Current transformers Specification Part 2 Measuring current transformers (Second Revision).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2506-2006 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities《开发新的和现有工程设施成本风险缓解的标准指南》.pdf

ASTM E2506-2006e1 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities《开发新的和现有工程设施成本风险缓解的标准指南》.pdf

ASTM E2506-2011 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities《对新的和现有的建造设施实行成本效益风险缓解计划的标准指南》.pdf

ASTM E2506-2015 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities《发展新的和现有工程设施成本效益风险缓解计划的标准指南》.pdf

ASTM E2509-2008 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode《等温模式下流变仪的温度校准的标准试验方法》.pdf

ASTM E2509-2014 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode《等温流变仪温度校准的标准试验方法》.pdf

ASTM E2510-2007 Standard Test Method for Torque Calibration or Conformance of Rheometers《流变仪的扭矩校准或一致性用标准试验方法》.pdf

ASTM E2510-2007(2013) Standard Test Method for Torque Calibration or Conformance of Rheometers《流变仪的扭矩校准或一致性用标准试验方法》.pdf

ASTM E2511-2009 Standard Guide for Detailing of EIFS-Clad Wall Assemblies《外保温层和装修层EIFS)包覆的墙壁组件详细设计的标准指南》.pdf