IS 3008-1993 Brush shoe blacking Specification (Second Revision).pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 4170-2006 Aerospace series Paints and varnishes Test method for measurement of resistance to cold crack temperature cycle Edition P 1《航空航天系列.油漆涂料试验方法阻力测定冷裂缝温度循环.P1版》.pdf

AECMA PREN 4171-2005 Aerospace series Paints and varnishes Test method for determination of phosphoric acid index Edition P 1《航空航天系列.油漆涂料试验方法磷酸含量测定.P1版》.pdf

AECMA PREN 4172-1999 Aerospace Series Lockbolts Protruding Head Sheartype Close Tolerance in Titanium Alloy TI-P64001 Anodized Metric Series Classification 1 100 MPa (at Ambient Te.pdf

AECMA PREN 4173-1999 Aerospace Series Lockbolts 100 Degree Countersunk Normal Head Sheartype Close Tolerance in Titanium Alloy TI-P64001 Anodized Metric Series Classification 1 100.pdf

AECMA PREN 4174-1999 Aerospace Series Collars Swage Locking Sheartype in Aluminium Alloy 2024 Anodized or Chromated Metric Series Edition P 1《航空航天系列.阳极氧化或铬酸盐处理铝合金2024、铆紧剪式垫圈　米制系列》.pdf

AECMA PREN 4175-1999 Aerospace Series Collars Flanged Swage Locking Sheartype in Titanium TI-P99002 Metric Series Edition P 1《空航天系列　钛 TI-P99002、法兰式铆紧剪式垫圈　米制》.pdf

AECMA PREN 4176-1999 Aerospace Series Lockbolts 100 Degree Countersunk Normal Head or Protruding Head Tension- Sheartype Close Tolerance in Titanium Alloy TI-P64001 Anodized or wit.pdf

AECMA PREN 4178-1994 Aerospace Series Screws Pan Head Six Lobe Recess Coarse Tolerance Normal Shank Medium Length Thread in Titanium Alloy Anodized MoS2 Lubricated Classification .pdf

AECMA PREN 4179-2008 Aerospace series Qualification and approval of personnel for non-destructive testing Edition P4《航空航天系列.无损检测人员的合格与核准》.pdf