1、 AMSC N/A FSC 5935 MS27283C 21 February 2013 SUPERSEDING MS27283B (USAF) 8 March 1974 DETAIL SPECIFICATION SHEET CONTACT, ELECTRICAL - PLUG CONNECTOR, RAMP POWER, 416/240 VOLTS, LARGE, FEMALE This specification is approved for use by all Departments and Agencies of the Department of Defense. The req
2、uirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38159. NOTES: 1. Material: Copper alloy in accordance with MIL-DTL-38159. 2. Finish: Finish in accordance with MIL-DTL-38159. 3. Unless otherwise specified machined surface 125 or better in acc
3、ordance with ASME B46.1. 4. Remove all burrs and sharp edges. 5. All dimensions shown are for finished part after plating. 6. Dimension are in inches, metric equivalents are given for information only. 7. All diameters must be concentric to each other within 0.004 TIR. 8. Use with insert MS27282. FI
4、GURE 1. Contact, ramp power, 412/240 volts, large female. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27283C 2 Part or Identifying Number (PIN): MS27283-1 Changes from previous issues. Marginal notations are not used in this revision
5、 to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38159, this document references the following: MS27282 ASME B46.1 CONCLUDING MATERIAL Custodians: Preparing activity: Air Force - 85 DLA - CC DLA - CC (Project 5935-
6、2012-238) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
