ITU-R BO 1898-1-2012 Power flux-density value required for the protection of receiving earth stations in the broadcasting-satellite service in Regions 1 and 3 from emissions by a s the.pdf

上传人:appealoxygen216 文档编号:790101 上传时间:2019-02-02 格式:PDF 页数:4 大小:1.28MB
下载 相关 举报
ITU-R BO 1898-1-2012 Power flux-density value required for the protection of receiving earth stations in the broadcasting-satellite service in Regions 1 and 3 from emissions by a s the.pdf_第1页
第1页 / 共4页
ITU-R BO 1898-1-2012 Power flux-density value required for the protection of receiving earth stations in the broadcasting-satellite service in Regions 1 and 3 from emissions by a s the.pdf_第2页
第2页 / 共4页
ITU-R BO 1898-1-2012 Power flux-density value required for the protection of receiving earth stations in the broadcasting-satellite service in Regions 1 and 3 from emissions by a s the.pdf_第3页
第3页 / 共4页
ITU-R BO 1898-1-2012 Power flux-density value required for the protection of receiving earth stations in the broadcasting-satellite service in Regions 1 and 3 from emissions by a s the.pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 Recommendation ITU-R BO.1898-1(12/2012)Power flux-density value required for the protection of receiving earth stations in the broadcasting-satellite service inRegions 1 and 3 from emissions by astation in the fixed and/or mobile services in the band 21.4-22 GHzBO SeriesSatellite deliveryii Rec. IT

2、U-R BO.1898-1 Foreword The role of the Radiocommunication Sector is to ensure the rational, equitable, efficient and economical use of the radio-frequency spectrum by all radiocommunication services, including satellite services, and carry out studies without limit of frequency range on the basis of

3、 which Recommendations are adopted. The regulatory and policy functions of the Radiocommunication Sector are performed by World and Regional Radiocommunication Conferences and Radiocommunication Assemblies supported by Study Groups. Policy on Intellectual Property Right (IPR) ITU-R policy on IPR is

4、described in the Common Patent Policy for ITU-T/ITU-R/ISO/IEC referenced in Annex 1 of Resolution ITU-R 1. Forms to be used for the submission of patent statements and licensing declarations by patent holders are available from http:/www.itu.int/ITU-R/go/patents/en where the Guidelines for Implement

5、ation of the Common Patent Policy for ITU-T/ITU-R/ISO/IEC and the ITU-R patent information database can also be found. Series of ITU-R Recommendations (Also available online at http:/www.itu.int/publ/R-REC/en) Series Title BO Satellite delivery BR Recording for production, archival and play-out; fil

6、m for television BS Broadcasting service (sound) BT Broadcasting service (television) F Fixed service M Mobile, radiodetermination, amateur and related satellite services P Radiowave propagation RA Radio astronomy RS Remote sensing systems S Fixed-satellite service SA Space applications and meteorol

7、ogy SF Frequency sharing and coordination between fixed-satellite and fixed service systems SM Spectrum management SNG Satellite news gathering TF Time signals and frequency standards emissions V Vocabulary and related subjects Note: This ITU-R Recommendation was approved in English under the proced

8、ure detailed in Resolution ITU-R 1. Electronic Publication Geneva, 2012 ITU 2012 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without written permission of ITU. Rec. ITU-R BO.1898-1 1 RECOMMENDATION ITU-R BO.1898-1 Power flux-density value required for

9、 the protection of receiving earth stations in the broadcasting-satellite service in Regions 1 and 3 from emissions by a station in the fixed and/or mobile services in the band 21.4-22 GHz (01/2012, 12/2012) Scope This Recommendation provides the maximum permissible pfd value to protect receiving ea

10、rth stations in the BSS in Regions 1 and 3 from emissions generated by a single station in the fixed and/or mobile services in the band 21.4-22.0 GHz. WRC-12 decided to include in Article 5 of the Radio Regulations the pfd value contained in this Recommendation as a hard limit. The ITU Radiocommunic

11、ation Assembly, considering a) that emissions from terrestrial stations may produce interference exceeding permissible levels into receiving earth stations in the BSS in Regions 1 and 3 in the band 21.4-22.0 GHz; b) that in order to protect BSS receiving earth stations in Regions 1 and 3 from unacce

12、ptable interference of terrestrial stations, an appropriate maximum permissible power flux-density (pfd) value applicable to emissions from a terrestrial station in this band needs to be determined, recognizing a) that WRC-12 approved the limit of emissions by a terrestrial station to protect BSS re

13、ceiving earth stations in the band 21.4-22.0 GHz. The limit is specified in Article 5 of the Radio Regulations, recommends 1 that, in order to protect BSS receiving earth stations, a value of 120.4 dB(W/(m2MHz) should be used as the single-entry maximum permissible level of the pfd produced by emiss

14、ions from a terrestrial station in the band 21.4-22.0 GHz; 2 that this value should not be exceeded at 3 m above the ground at any point of the territory of any other administrations in Regions 1 and 3 for more than 20% of the time, calculated in accordance with Recommendation ITU-R P.452-14; 3 that

15、 the following Notes should be considered as part of this Recommendation. NOTE 1 The pfd value in recommends 1 was derived using the methodology contained in Annex 1. NOTE 2 The single-entry pfd in recommends 1 is derived from an aggregate I/N = 12.2 dB (corresponding to a 6% increase of the equival

16、ent system noise temperature), assuming an equivalent number of 3.3 interfering sources, each transmitting at maximum single-entry pfd. NOTE 3 The pfd value in recommends 1 is derived under the assumption that the minimum angle between the direction of maximum antenna gain of the BSS receiving earth

17、 station and the direction to the interfering transmitter is 10 degrees. 2 Rec. ITU-R BO.1898-1 Annex 1 Methodology and assumptions to calculate the maximum permissible power flux-density value required for the protection of the BSS receiving earth stations in Regions 1 and 3, from emissions by a te

18、rrestrial station in the band 21.4-22.0 GHz In order to protect the BSS receiving earth station, the maximum permissible power flux-density (pfd) value produced by emissions from a terrestrial station in the band 21.4-22.0 GHz is given by the equation: )()/(minnnSNIPPFD += (1) where: PFDn: maximum p

19、ermissible pfd value for a single terrestrial station (dB(W/(m2MHz) Pn= kT (106): BSS receiving earth station noise power (dB(W/MHz) I / N: permissible interference-to-noise power ratio (dB) S(min): BSS receiving earth station antenna-effective area (dBm2). The equivalent noise temperature of the BS

20、S receiving earth station is assumed as 140 K. Therefore, the noise power, Pn, for the BSS receiving station is calculated as follows: Pn= 228.6 + 10 log(140) + 10 log(106) = 147.1 dB(W/MHz) (2) The permissible I/N ratio from a single terrestrial station is assumed as 17.4 dB1. S(min) is defined by

21、the following equation: )4/(log10)()(2+=minminGS (3) where G(min) is BSS receiving earth station antenna gain in the direction minfrom the axis of the main beam and in a corresponding range of minvalues, the antenna gain is equal to: dBi 4)(log2529)( =minminG (4) where the minimum angle between the

22、direction of maximum antenna gain of the BSS receiving earth station and the direction to the interfering transmitter, min, for the broadcasting-satellite network in the band 21.4-22.0 GHz is assumed as 10 degrees. Then, S(min) = 44.2 dBm2(at 21.7 GHz). Using these values above and equation (1), the

23、 maximum permissible single-entry PFDnis calculated to be: PFDn= 120.4 dB(W/(m2 MHz) _ 1The single-entry pfd is derived from an aggregate I/N = 12.2 dB (corresponding to a 6% increase of the equivalent system noise temperature), assuming an equivalent number of 3.3 interfering sources, each transmitting at maximum single-entry pfd.

展开阅读全文
相关资源
猜你喜欢
  • ASTM E1502-2010 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures《供基准温度冰点室使用的标准指南》.pdf ASTM E1502-2010 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures《供基准温度冰点室使用的标准指南》.pdf
  • ASTM E1502-2016 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures《基准温度用固定点装置的标准使用指南》.pdf ASTM E1502-2016 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures《基准温度用固定点装置的标准使用指南》.pdf
  • ASTM E1503-2006 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System《使用数字统计声分析系统测量室外声级的标准试验方法》.pdf ASTM E1503-2006 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System《使用数字统计声分析系统测量室外声级的标准试验方法》.pdf
  • ASTM E1503-2012 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System 《使用数字统计分析系统进行户外声测量的标准试验方法》.pdf ASTM E1503-2012 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System 《使用数字统计分析系统进行户外声测量的标准试验方法》.pdf
  • ASTM E1503-2014 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System《使用数字统计分析系统进行户外声测量的标准试验方法》.pdf ASTM E1503-2014 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System《使用数字统计分析系统进行户外声测量的标准试验方法》.pdf
  • ASTM E1504-2006 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)《次级离子质谱法(SIMS)中质谱数据报告的标准实施规程》.pdf ASTM E1504-2006 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)《次级离子质谱法(SIMS)中质谱数据报告的标准实施规程》.pdf
  • ASTM E1504-2011 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)《次级离子质谱分析法中报告质谱数据的标准操作规程》.pdf ASTM E1504-2011 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)《次级离子质谱分析法中报告质谱数据的标准操作规程》.pdf
  • ASTM E1506-1997(2003) Standard Test Methods for Analysis of Acid-Grade Calcium Fluoride (Fluorspar)《分析酸级氟化钙(荧石)的标准试验方法》.pdf ASTM E1506-1997(2003) Standard Test Methods for Analysis of Acid-Grade Calcium Fluoride (Fluorspar)《分析酸级氟化钙(荧石)的标准试验方法》.pdf
  • ASTM E1508-1998(2003) Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy《用能量分散能谱学作定量分析的标准指南》.pdf ASTM E1508-1998(2003) Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy《用能量分散能谱学作定量分析的标准指南》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1