ITU-R QUESTION 118-45-2002 Sharing criteria between the mobile-satellite service and the fixed service《移动卫星业务与固定业务共享标准》.pdf

上传人:ownview251 文档编号:792357 上传时间:2019-02-02 格式:PDF 页数:1 大小:11.40KB
下载 相关 举报
ITU-R QUESTION 118-45-2002 Sharing criteria between the mobile-satellite service and the fixed service《移动卫星业务与固定业务共享标准》.pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、QUESTION ITU-R 118-4/5*,*Sharing criteria between the mobile-satellite serviceand the fixed service(1990-1995-1999-2001-2002)The ITU Radiocommunication Assembly,consideringa) that systems in the fixed service (FS) are widely employed throughout the world and makeextensive use of much of the radio-fr

2、equency spectrum;b) that the mobile-satellite service (MSS) is allocated in a number of bands in the ITU RadioRegulations on a primary basis co-equally shared with the FS;c) that there is potential for interference to systems in the FS from MSS systems using bothgeostationary and non-geostationary o

3、rbits;d) that several World Radiocommunication Conferences addressed a number of allocationissues that affected sharing between the FS and MSS,decides that the following Questions should be studied1 What levels of interference from the MSS are acceptable to systems in the FS, includingpercentage of

4、time considerations?2 What are the necessary and acceptable constraints on the services to facilitate sharing?further decides1 that the initial studies on the Question should be completed by 2006.NOTE 1 “Systems in the fixed service“ in this Question include fixed wireless access systems(both fixed-based technology and mobile-derived technology).NOTE 2 See Recommendations ITU-R F.758, ITU-R F.1107, ITU-R F.1108, ITU-R F.1246,ITU-R F.1335 and ITU-R F.1405._* This Question should be brought to the attention of Radiocommunication Study Group 8 (WP 8D).* Former Question ITU-R 118-4/9.

展开阅读全文
相关资源
猜你喜欢
  • GOST 19036-1994 Cylindrical worm gear pairs Basic worm and basic generating worm《圆柱蜗杆传动 原始蜗杆和原始母蜗杆》.pdf GOST 19036-1994 Cylindrical worm gear pairs Basic worm and basic generating worm《圆柱蜗杆传动 原始蜗杆和原始母蜗杆》.pdf
  • GOST 19040-1981 Metal tubes Method of tension test at high temperatures《金属管 在高温下拉伸试验法》.pdf GOST 19040-1981 Metal tubes Method of tension test at high temperatures《金属管 在高温下拉伸试验法》.pdf
  • GOST 19041-1985 Transportation packages and multi-packages of sawn timber Packaging marking transportation and storage《运输时成捆和成捆一组的锯材 打捆、标志、运输和贮存》.pdf GOST 19041-1985 Transportation packages and multi-packages of sawn timber Packaging marking transportation and storage《运输时成捆和成捆一组的锯材 打捆、标志、运输和贮存》.pdf
  • GOST 19042-1980 Throw-away (indexable) inserts Classification Notation Forms《可转位的多面体刀片 分类 标志体系 形状》.pdf GOST 19042-1980 Throw-away (indexable) inserts Classification Notation Forms《可转位的多面体刀片 分类 标志体系 形状》.pdf
  • GOST 19043-1980 Triangular throw-away (indexable) carbide cutting inserts Design and dimensions《可转位的多面体正三棱形硬质合金切削刀片 结构及尺寸》.pdf GOST 19043-1980 Triangular throw-away (indexable) carbide cutting inserts Design and dimensions《可转位的多面体正三棱形硬质合金切削刀片 结构及尺寸》.pdf
  • GOST 19044-1980 Triangular throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的多面体带孔的正三棱形硬质合金切削刀片 结构及尺寸》.pdf GOST 19044-1980 Triangular throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的多面体带孔的正三棱形硬质合金切削刀片 结构及尺寸》.pdf
  • GOST 19045-1980 Triangular throw-away (indexable) carbide cutting inserts with 11 end-clearance angle Design and dimensions《可转位的多面体带厚角的正三棱形硬质合金切削刀片 结构及尺寸》.pdf GOST 19045-1980 Triangular throw-away (indexable) carbide cutting inserts with 11 end-clearance angle Design and dimensions《可转位的多面体带厚角的正三棱形硬质合金切削刀片 结构及尺寸》.pdf
  • GOST 19046-1980 Triangular throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的多面体带孔和单侧有切屑槽的正三.pdf GOST 19046-1980 Triangular throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的多面体带孔和单侧有切屑槽的正三.pdf
  • GOST 19047-1980 Hexagon throw-away (indexable) carbide cutting inserts with 80 included angle and cylindrical holes Design and dimensions《可转位的多面体带孔和80角的六棱形硬质合金切削刀片 结构及尺寸》.pdf GOST 19047-1980 Hexagon throw-away (indexable) carbide cutting inserts with 80 included angle and cylindrical holes Design and dimensions《可转位的多面体带孔和80角的六棱形硬质合金切削刀片 结构及尺寸》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1