1、 I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T G.979 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (11/2016) SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Digital sections and digital line system Optical fibre submarine cable systems Character
2、istics of monitoring systems for optical submarine cable systems Recommendation ITU-T G.979 ITU-T G-SERIES RECOMMENDATIONS TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS INTERNATIONAL TELEPHONE CONNECTIONS AND CIRCUITS G.100G.199 GENERAL CHARACTERISTICS COMMON TO ALL ANALOGUE CARRIER-T
3、RANSMISSION SYSTEMS G.200G.299 INDIVIDUAL CHARACTERISTICS OF INTERNATIONAL CARRIER TELEPHONE SYSTEMS ON METALLIC LINES G.300G.399 GENERAL CHARACTERISTICS OF INTERNATIONAL CARRIER TELEPHONE SYSTEMS ON RADIO-RELAY OR SATELLITE LINKS AND INTERCONNECTION WITH METALLIC LINES G.400G.449 COORDINATION OF RA
4、DIOTELEPHONY AND LINE TELEPHONY G.450G.499 TRANSMISSION MEDIA AND OPTICAL SYSTEMS CHARACTERISTICS G.600G.699 DIGITAL TERMINAL EQUIPMENTS G.700G.799 DIGITAL NETWORKS G.800G.899 DIGITAL SECTIONS AND DIGITAL LINE SYSTEM G.900G.999 General G.900G.909 Parameters for optical fibre cable systems G.910G.919
5、 Digital sections at hierarchical bit rates based on a bit rate of 2048 kbit/s G.920G.929 Digital line transmission systems on cable at non-hierarchical bit rates G.930G.939 Digital line systems provided by FDM transmission bearers G.940G.949 Digital line systems G.950G.959 Digital section and digit
6、al transmission systems for customer access to ISDN G.960G.969 Optical fibre submarine cable systems G.970G.979 Optical line systems for local and access networks G.980G.989 Metallic access networks G.990G.999 MULTIMEDIA QUALITY OF SERVICE AND PERFORMANCE GENERIC AND USER-RELATED ASPECTS G.1000G.199
7、9 TRANSMISSION MEDIA CHARACTERISTICS G.6000G.6999 DATA OVER TRANSPORT GENERIC ASPECTS G.7000G.7999 PACKET OVER TRANSPORT ASPECTS G.8000G.8999 ACCESS NETWORKS G.9000G.9999 For further details, please refer to the list of ITU-T Recommendations. Rec. ITU-T G.979 (11/2016) i Recommendation ITU-T G.979 C
8、haracteristics of monitoring systems for optical submarine cable systems Summary Recommendation ITU-T G.979 is concerned with the characteristics of monitoring systems for optical fibre submarine cable systems. It covers the aspects relating to functional architecture, the characteristics of monitor
9、ing equipment and the parameters for monitoring. This second edition of the Recommendation includes some modifications to apply monitoring systems to repeaterless systems as well as repeatered systems. History Edition Recommendation Approval Study Group Unique ID* 1.0 ITU-T G.979 2012-10-29 15 11.10
10、02/1000/11793 1.1 ITU-T G.979 (2012) Cor. 1 2014-05-14 15 11.1002/1000/12183 2.0 ITU-T G.979 2016-11-13 15 11.1002/1000/13118 Keywords Monitoring systems, optical fibre submarine cable systems. * To access the Recommendation, type the URL http:/handle.itu.int/ in the address field of your web browse
11、r, followed by the Recommendations unique ID. For example, http:/handle.itu.int/11.1002/1000/11830-en. ii Rec. ITU-T G.979 (11/2016) FOREWORD The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications, information and communication tec
12、hnologies (ICTs). The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Tele
13、communication Standardization Assembly (WTSA), which meets every four years, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of ITU-T Recommendations is covered by the procedure laid down in WTSA Resolution 1. In some a
14、reas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecommunication administration and a recognized o
15、perating agency. Compliance with this Recommendation is voluntary. However, the Recommendation may contain certain mandatory provisions (to ensure, e.g., interoperability or applicability) and compliance with the Recommendation is achieved when all of these mandatory provisions are met. The words “s
16、hall“ or some other obligatory language such as “must“ and the negative equivalents are used to express requirements. The use of such words does not suggest that compliance with the Recommendation is required of any party. INTELLECTUAL PROPERTY RIGHTSITU draws attention to the possibility that the p
17、ractice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation dev
18、elopment process. As of the date of approval of this Recommendation, ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementers are cautioned that this may not represent the latest information and are ther
19、efore strongly urged to consult the TSB patent database at http:/www.itu.int/ITU-T/ipr/. ITU 2017 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU. Rec. ITU-T G.979 (11/2016) iii Table of Contents Page 1 Scope .
20、1 2 References . 1 3 Definitions 1 3.1 Terms defined elsewhere 1 3.2 Terms defined in this Recommendation . 2 4 Abbreviations and acronyms 2 5 Conventions 3 6 General architecture 3 6.1 Reference points . 4 7 Characteristics of monitoring equipment 5 7.1 Passive monitoring . 5 7.2 Active monitoring
21、. 5 7.3 Monitoring impact 5 8 Recommended parameters for monitoring . 6 8.1 Parameters for passive monitoring . 6 8.2 Parameters for active monitoring . 6 Appendix I Examples of parameters of monitoring systems for optical submarine cable systems 7 Rec. ITU-T G.979 (11/2016) 1 Recommendation ITU-T G
22、.979 Characteristics of monitoring systems for optical submarine cable systems 1 Scope This Recommendation is concerned with the characteristics of monitoring systems for optical fibre submarine cable systems. It covers the aspects relating to functional architecture, the characteristics of monitori
23、ng equipment and the parameters for monitoring. The purpose of this Recommendation is to help users (e.g., submarine network operators) in their operation and maintenance, diagnostics and deployment of optical fibre submarine cable systems. Detailed information is given for: 1) monitoring system arc
24、hitecture 2) reference points 3) parameters for monitoring. 2 References The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provision of this Recommendation. At the time of publication, the editions indicated were valid. All
25、Recommendations and other references are subject to revision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regu
26、larly published. The reference to a document within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T G.972 Recommendation ITU-T G.972 (2011), Definition of terms relevant to optical fibre submarine cable systems. ITU-T G.976 Recommendation ITU-T
27、G.976 (2014), Tests methods applicable to optical fibre submarine cable systems. ITU-T G.977 Recommendation ITU-T G.977 (2015), Characteristics of optically amplified optical fibre submarine cable systems. IEC 61746-1 IEC 61746-1 (2009), Calibration of optical time-domain reflectometers (OTDR) Part
28、1: OTDR for single mode fibres. 3 Definitions 3.1 Terms defined elsewhere This Recommendation uses the following terms defined elsewhere: 3.1.1 maintenance controller ITU-T G.972: A computer with an interface to the supervision and remote maintenance equipment, which is commonly used during the supe
29、rvision and remote maintenance activity. 3.1.2 optical fibre submarine cable system ITU-T G.972: A set of equipment designed to permit the interconnection of two or more terminal stations. The optical fibre submarine cable system is usually composed of terminal equipment (terminal transmission equip
30、ment, power feeding equipment, maintenance controller, etc.), and submersible equipment (cable, repeater(s), branching unit(s), etc.). 2 Rec. ITU-T G.979 (11/2016) 3.1.3 supervisory system ITU-T G.972: The whole of equipment and sub-assemblies commonly providing one or more of the following function
31、s: monitoring the performance of the submarine equipment and sub-assemblies; monitoring the performance of the system terminal equipment; monitoring the end-to-end performance of the digital line sections; enabling fault location inside the submarine plant, to within one repeater section, where poss
32、ible; controlling redundancy switching, if provided inside the submarine portion; providing interfaces to other management facilities. 3.1.4 terminal station ITU-T G.972: The telecommunication station usually located in the vicinity of the landing point and housing the optical fibre submarine cable
33、system terminal equipment and that of associated terrestrial systems. 3.2 Terms defined in this Recommendation This Recommendation defines the following terms: 3.2.1 active monitoring equipment (AME): One of the two categories of monitoring equipment (ME) with the other being passive monitoring equi
34、pment (PME). AME monitors the status of submerged equipment by communicating with the monitored equipment to obtain a performance status. 3.2.2 monitoring equipment (ME): Equipment used to monitor the status of the submerged plant of a submarine cable system, which is classified into one of two cate
35、gories according to the monitoring mechanism: passive monitoring equipment (PME) with no communication between the submerged plant and the monitoring equipment, or active monitoring equipment (AME) which has communication between the submerged plant and the monitoring equipment. 3.2.3 passive monito
36、ring equipment (PME): One of the two categories of ME with the other being AME. PME does not communicate with the submerged plant, but monitors the status of the submerged plant by detecting optical/electrical paths, e.g., monitoring equipment based on OTDR/COTDR. To obtain a performance status, ret
37、urn paths within the submerged plant (described in clause 7.5 of ITU-T G.977) are necessary. 4 Abbreviations and acronyms This Recommendation uses the following abbreviations and acronyms: AME Active Monitoring Equipment BU Branching Unit COTDR Coherent Optical Time Domain Reflectometry CTE Cable Te
38、rminating Equipment MC Maintenance Controller ME Monitoring Equipment OTDR Optical Time Domain Reflectometry PFE Power Feeding Equipment PME Passive Monitoring Equipment TTE Terminal Transmission Equipment ROPA Remote Optically Pumped Amplifier Rec. ITU-T G.979 (11/2016) 3 5 Conventions None. 6 Gene
39、ral architecture Figure 1 General architecture of repeatered system Figure 1 shows the general architecture of a repeatered optical fibre submarine cable system with monitoring equipment (ME). Monitoring equipment should be deployed in each terminal station to provide routine monitoring for maintena
40、nce. The monitoring of system status could be obtained by periodically collecting performance data from a submerged plant. Also, for maintenance convenience, it should support or provide interfaces to assist fault location. Figure 2 General architecture of repeaterless system 4 Rec. ITU-T G.979 (11/
41、2016) Figure 2 shows the general architecture of a repeaterless optical fibre submarine cable system with monitoring equipment. Two different ways, shown in Figure 3 and Figure 4, may be chosen to configure an MEs connection in a submarine cable system: In Figure 3, a terminal transmission equipment
42、 (TTE) is connected between an ME and cable terminating equipment (CTE) and monitoring signals and service signals are coupled within the TTE and sent to the submarine cable system. In Figure 4, an ME is connected between a TTE and CTE and service signals and monitoring signals are coupled within th
43、e ME and sent to the submarine cable system. NOTE 1 M denotes monitoring output interface to cables. NOTE 2 denotes the monitoring signal flow in the sending direction; the receiving signal is obtained from the other fibre. NOTE 3 This figure defines only one terminal station in the system, the othe
44、rs are the same as this one. NOTE 4 PFE used in repeatered systems only. Figure 3 Monitoring output from TTE NOTE 1 M denotes monitoring output interface to cables. NOTE 2 denotes the monitoring signal flow in the sending direction; the receiving signal is obtained from the other fibre. NOTE 3 This
45、figure defines only one terminal station in the system, the others are the same as this one. NOTE 4 PFE used in repeatered systems only. Figure 4 Monitoring output from ME As part of a supervisory system, MEs are commonly connected to MCs through management interfaces. 6.1 Reference points With refe
46、rence to Figure 3 and Figure 4, reference points should comply with the parameters specified for monitoring. Rec. ITU-T G.979 (11/2016) 5 At point M, a monitoring output interface needs to comply with the following parameters: probe light output power, wavelength and pulse width (for passive monitor
47、ing) modulation parameters (for active monitoring). 7 Characteristics of monitoring equipment 7.1 Passive monitoring In passive monitoring, performance is obtained by detecting optical or electrical signals. Probe signals are sent to a submerged plant, and the returned signals will be analysed to re
48、flect the systems performance status. For example, the backscattered light of the OTDR/COTDR described in IEC 61746-1 is detected and processed, usually as curves of signal intensity versus distance to analyse and diagnose system status. One PME monitors one direction performance of the submarine ca
49、ble system. To get bidirectional performance, a PME should be deployed in each terminal station. It is recommended that status changes in the probed optical paths, such as fibre breaks, variations of repeater gain and fibre attenuation or reflections, are monitored in passive monitoring. As passive monitoring obtains the system status indirectly, comparison with baselines is used in status monitoring. Status monitoring should use the same parameters as the baselines to ensure th
