ITU-T Q 3626-2016 Message waiting indication using IP multimedia core network subsystem C Protocol specification (Study Group 11)《使用IP多媒体核心网络子系统的消息等待指示-协议规范(研究组11)》.pdf

上传人:priceawful190 文档编号:801609 上传时间:2019-02-04 格式:PDF 页数:8 大小:315.13KB
下载 相关 举报
ITU-T Q 3626-2016 Message waiting indication using IP multimedia core network subsystem C Protocol specification (Study Group 11)《使用IP多媒体核心网络子系统的消息等待指示-协议规范(研究组11)》.pdf_第1页
第1页 / 共8页
ITU-T Q 3626-2016 Message waiting indication using IP multimedia core network subsystem C Protocol specification (Study Group 11)《使用IP多媒体核心网络子系统的消息等待指示-协议规范(研究组11)》.pdf_第2页
第2页 / 共8页
ITU-T Q 3626-2016 Message waiting indication using IP multimedia core network subsystem C Protocol specification (Study Group 11)《使用IP多媒体核心网络子系统的消息等待指示-协议规范(研究组11)》.pdf_第3页
第3页 / 共8页
ITU-T Q 3626-2016 Message waiting indication using IP multimedia core network subsystem C Protocol specification (Study Group 11)《使用IP多媒体核心网络子系统的消息等待指示-协议规范(研究组11)》.pdf_第4页
第4页 / 共8页
ITU-T Q 3626-2016 Message waiting indication using IP multimedia core network subsystem C Protocol specification (Study Group 11)《使用IP多媒体核心网络子系统的消息等待指示-协议规范(研究组11)》.pdf_第5页
第5页 / 共8页
点击查看更多>>
资源描述

1、 I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T Q.3626 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (02/2016) SERIES Q: SWITCHING AND SIGNALLING Signalling requirements and protocols for the NGN Service and session control protocols supplementary services based on SIP

2、-IMS Message waiting indication using IP multimedia core network subsystem Protocol specification Recommendation ITU-T Q.3626 ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SIGNALLING IN THE INTERNATIONAL MANUAL SERVICE Q.1Q.3 INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING Q.4Q.59 FUNCT

3、IONS AND INFORMATION FLOWS FOR SERVICES IN THE ISDN Q.60Q.99 CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100Q.119 SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4, 5, 6, R1 AND R2 Q.120Q.499 DIGITAL EXCHANGES Q.500Q.599 INTERWORKING OF SIGNALLING SYSTEMS Q.600Q.699 SPECIFICATIONS OF SIGNALLING SYSTEM N

4、o. 7 Q.700Q.799 Q3 INTERFACE Q.800Q.849 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 Q.850Q.999 PUBLIC LAND MOBILE NETWORK Q.1000Q.1099 INTERWORKING WITH SATELLITE MOBILE SYSTEMS Q.1100Q.1199 INTELLIGENT NETWORK Q.1200Q.1699 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR IMT-2000 Q.1700Q.1799 SPECIFICATION

5、S OF SIGNALLING RELATED TO BEARER INDEPENDENT CALL CONTROL (BICC) Q.1900Q.1999 BROADBAND ISDN Q.2000Q.2999 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR THE NGN Q.3000Q.3899 General Q.3000Q.3029 Network signalling and control functional architecture Q.3030Q.3099 Network data organization within the NGN

6、Q.3100Q.3129 Bearer control signalling Q.3130Q.3179 Signalling and control requirements and protocols to support attachment in NGN environments Q.3200Q.3249 Resource control protocols Q.3300Q.3369 Service and session control protocols Q.3400Q.3499 Service and session control protocols supplementary

7、services Q.3600Q.3616 Service and session control protocols supplementary services based on SIP-IMS Q.3617Q.3639 NGN applications Q.3700Q.3849 TESTING SPECIFICATIONS Q.3900Q.4099 For further details, please refer to the list of ITU-T Recommendations. Rec. ITU-T Q.3626 (02/2016) i Recommendation ITU-

8、T Q.3626 Message waiting indication using IP multimedia core network subsystem Protocol specification Summary Recommendation ITU-T Q.3626 v.1 (2016) specifies requirements for supplementary service such as a message waiting indication (MWI) to be provided on the IMS platform. The version number, v.1

9、, indicates that this is version one of Recommendation ITU-T Q.3626, and that it relates to Release 10 of the relevant 3GPP/ETSI standard. This Recommendation endorses ETSI TS 124 606 V10.2.0 (2012-07), “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications Syste

10、m (UMTS); LTE; Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.606 version 10.2.0 Release 10)“. History Edition Recommendation Approval Study Group Unique ID* 1.0 ITU-T Q.3626 v.1 2016-02-13 11 11.1002/1000/12724 Keywords IMS,

11、 MWI, network side, SDP, SIP, testing, user side. * To access the Recommendation, type the URL http:/handle.itu.int/ in the address field of your web browser, followed by the Recommendations unique ID. For example, http:/handle.itu.int/11.1002/1000/11830-en. ii Rec. ITU-T Q.3626 (02/2016) FOREWORD T

12、he International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications, information and communication technologies (ICTs). The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying techn

13、ical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Assembly (WTSA), which meets every four years, establishes the topics for study by the ITU-T study groups which,

14、in turn, produce Recommendations on these topics. The approval of ITU-T Recommendations is covered by the procedure laid down in WTSA Resolution 1. In some areas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with ISO and IEC

15、. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. Compliance with this Recommendation is voluntary. However, the Recommendation may contain certain mandatory provisions (to ens

16、ure, e.g., interoperability or applicability) and compliance with the Recommendation is achieved when all of these mandatory provisions are met. The words “shall“ or some other obligatory language such as “must“ and the negative equivalents are used to express requirements. The use of such words doe

17、s not suggest that compliance with the Recommendation is required of any party. INTELLECTUAL PROPERTY RIGHTSITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning

18、 the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process. As of the date of approval of this Recommendation, ITU had not received notice of intellectual property, protected by patents

19、, which may be required to implement this Recommendation. However, implementers are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database at http:/www.itu.int/ITU-T/ipr/. ITU 2016 All rights reserved. No part of this publicat

20、ion may be reproduced, by any means whatsoever, without the prior written permission of ITU. Rec. ITU-T Q.3626 (02/2016) 1 Recommendation ITU-T Q.3626 Message waiting indication using IP multimedia core network subsystem Protocol specification 1 Scope This Recommendation specifies the requirements t

21、o protocols implementation for providing supplementary service such as a message waiting indication (MWI) on the IMS basis. The Recommendation endorses ETSI TS 124 606 V10.2.0 (2012-07), “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; M

22、essage Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.606 version 10.2.0 Release 10)“. 2 References The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisi

23、ons of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations

24、 and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a document within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ETSI TS 124 606 V10.2.0 ETSI TS 124 606 V10.2.0 (2012-07

25、), Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.606 version 10.2.0 Release 10). 3 Definitions None. 4 Abbreviati

26、ons and acronyms This Recommendation uses the following abbreviations and acronyms: IMS IP Multimedia Subsystem IP Internet Protocol MWI Message Waiting Indication 5 Conventions None. 6 Endorsement ETSI TS 124 606 V10.2.0. Printed in Switzerland Geneva, 2016 SERIES OF ITU-T RECOMMENDATIONS Series A

27、Organization of the work of ITU-T Series D General tariff principles Series E Overall network operation, telephone service, service operation and human factors Series F Non-telephone telecommunication services Series G Transmission systems and media, digital systems and networks Series H Audiovisual

28、 and multimedia systems Series I Integrated services digital network Series J Cable networks and transmission of television, sound programme and other multimedia signals Series K Protection against interference Series L Environment and ICTs, climate change, e-waste, energy efficiency; construction,

29、installation and protection of cables and other elements of outside plant Series M Telecommunication management, including TMN and network maintenance Series N Maintenance: international sound programme and television transmission circuits Series O Specifications of measuring equipment Series P Term

30、inals and subjective and objective assessment methods Series Q Switching and signalling Series R Telegraph transmission Series S Telegraph services terminal equipment Series T Terminals for telematic services Series U Telegraph switching Series V Data communication over the telephone network Series X Data networks, open system communications and security Series Y Global information infrastructure, Internet protocol aspects, next-generation networks, Internet of Things and smart cities Series Z Languages and general software aspects for telecommunication systems

展开阅读全文
相关资源
猜你喜欢
  • BS ISO 8567-2003 Cinematography - Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints - Position and dimensions《电影 35mm和16mm电影发行拷贝上说明字幕的最大允许区域 尺寸.pdf BS ISO 8567-2003 Cinematography - Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints - Position and dimensions《电影 35mm和16mm电影发行拷贝上说明字幕的最大允许区域 尺寸.pdf
  • BS ISO 860-2008 Terminology work - Harmonization of concepts and terms《术语工作 概念和术语的统一》.pdf BS ISO 860-2008 Terminology work - Harmonization of concepts and terms《术语工作 概念和术语的统一》.pdf
  • BS ISO 8600-5-2005 Optics and photonics - Medical endoscopes and endotherapy devices - Determination of optical resolution of rigid endoscopes with optics《光学和光子学 医用内窥镜和内疗器件 刚性光学内窥镜.pdf BS ISO 8600-5-2005 Optics and photonics - Medical endoscopes and endotherapy devices - Determination of optical resolution of rigid endoscopes with optics《光学和光子学 医用内窥镜和内疗器件 刚性光学内窥镜.pdf
  • BS ISO 8622-1998 Cinematography - Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes - A-chain reproduction characteristics《电影技术 磁带声迹70mm电影发行拷贝的磁性录.pdf BS ISO 8622-1998 Cinematography - Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes - A-chain reproduction characteristics《电影技术 磁带声迹70mm电影发行拷贝的磁性录.pdf
  • BS ISO 8636-2-2008 Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Travelling bridge (gantry-type) machines《机床 桥式铣床的试验条件 精度测试 移动桥式(龙门式).pdf BS ISO 8636-2-2008 Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Travelling bridge (gantry-type) machines《机床 桥式铣床的试验条件 精度测试 移动桥式(龙门式).pdf
  • BS ISO 8639-2016 Glass-reinforced thermosetting plastics (GRP) pipes and fittings Test methods for leaktightness and proof of structural design of flexible joints《玻璃增强热固性塑料 (GRP) 管.pdf BS ISO 8639-2016 Glass-reinforced thermosetting plastics (GRP) pipes and fittings Test methods for leaktightness and proof of structural design of flexible joints《玻璃增强热固性塑料 (GRP) 管.pdf
  • BS ISO 8641-2008 Aerospace - Self-locking nuts with maximum operating temperature greater than 425 C - Procurement specification《航空航天 最大工作温度大于425℃的自锁紧螺母 采购规范》.pdf BS ISO 8641-2008 Aerospace - Self-locking nuts with maximum operating temperature greater than 425 C - Procurement specification《航空航天 最大工作温度大于425℃的自锁紧螺母 采购规范》.pdf
  • BS ISO 871-2006 Plastics - Determination of ignition temperature using a hot-air furnace《塑料 热空气炉的点燃温度的测定》.pdf BS ISO 871-2006 Plastics - Determination of ignition temperature using a hot-air furnace《塑料 热空气炉的点燃温度的测定》.pdf
  • BS ISO 8791-2-2013 Paper and board Determination of roughness smoothness (air leak methods) Bendtsen method《纸和纸板 粗糙度 平滑度的测定(空气泄漏法) 本特森法》.pdf BS ISO 8791-2-2013 Paper and board Determination of roughness smoothness (air leak methods) Bendtsen method《纸和纸板 粗糙度 平滑度的测定(空气泄漏法) 本特森法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1