1、INTERNATIONAL TELECOMMUNICATION UNION ITU-T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU TERMINALS FOR TELEMATIC SERVICES T.505 (1 1 /94) DOCUMENT APPLICATION PROFILE PM-26 FOR THE INTERCHANGE OF ENHANCED STRUCTURE, MIXED CONTENT DOCUMENTS IN PROCESSABLE AND FORMATTED FORMS ITU-T Recommendation T
2、.505 (Previously “CCIlT Recommendation”) -2-T RECMNaT.505 94 48b2591 0599170 O01 FOREWORD The ITU-T (Telecommunication Standardization Sector) is a permanent organ of the International Telecommunication Union (ITU). The ITU-T is responsible for studying technical, operating and tariff questions and
3、issuing Recommen- dations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in their turn, produce Recommendation
4、s on these topics. The approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Resolution No. 1 (Helsinki, March 1-12, 1993). ITU-T Recommendation T.505 was prepared by ITU-T Study Group 8 (1993-1996) and was approved under the WTSC Resolution No. 1 proc
5、edure on the 1 lth November 1994. NOTE! In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. O ITU 1995 All rights reserved. No part of this publication may be reproduced or utilized in
6、any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU. CONTENTS Scope Normative references . 2.1 2.2 Additional references Definitions Paired Recommendations I International Standards equivalent in technical content Relat
7、ionship with other Profiles . Conformance 5.1 Data stream conformance . 5.2 Implementation conformance . Characteristics supported by this document application profile . 6.1 6.2 6.3 6.4 6.5 6.6 Overview 6.1.1 General 6.1.2 Formatted form documents . 6.1.3 Processable form documents . 6.1.4 Formatted
8、 processable form documents 6.1.5 Generic-documents . 6.1.6 Document profile Logical characteristics 6.2.1 Introduction . 6.2.2 Overview of the logical structure 6.2.3 Body part of the logical structure 6.2.4 Common content part of the logical structure . 6.3.1 Overview of the layout characteristics
9、 Layout characteristics . 6.3.2 DocumentLayoutRoot . 6.3.3 PageSet 6.3.4 Page characteristics . 6.3.5 Body area characteristics 6.3.6 Header and footer area characteristics 6.3.7 GenericBlock and SpecificBlock 6.4.1 Flow controls 6.4.2 Layout of the document content 6.4.3 Layout controls applicable
10、in the absence of a generic layout structure . Content layout and imaging characteristics 6.5.1 Character content 6.5.2 Raster graphics content . 6.5.3 Geometric graphics content Miscellaneous features 6.6.1 Resource-documents . 6.6.2 External documents . 6.6.3 Border . 6.6.4 Application comments 6.
11、6.5 Alternative representation . 6.6.6 Automatic numbering mechanisms . 6.6.7 User readable comments . 6.6.8 User visible name Document layout characteristics . Recommendation T.505 (11/94) Page 1 1 1 3 3 4 4 4 5 5 5 5 5 5 6 6 6 7 7 7 7 11 12 12 14 14 15 17 24 25 25 26 28 30 30 30 39 41 41 41 42 42
12、42 42 43 46 46 i ITU-T RECVN*T.505 94 4862.591 0579372 784 = 6.7 Document management features . 6.7.1 Document constituent information 6.7.2 Document identification information 6.7.3 Document default information 6.7.4 Non-basic characteristics information . 6.7.5 Fonts list 6.7.6 Document management
13、 attributes . Specification of constituent constraints Introduction 7.1.1 Diagrams of relationships of logical constituents . 7.1.2 Diagrams of relationships of layout constituents 7.1.3 Notation Document profile constituent constraints . 7.2.1 Macro definitions 7.2.2 Constituents constraints Logica
14、l constituent constraints . 7.3.1 Macro definitions 7.3.2 Factor constraints 7.3.3 Constituent constraints 7.4.1 Macro definitions 7.4.2 Factor constraints 7.4.3 Constituent constraints Layout style constituent constraints 7.5.1 Macro definitions 7.5.2 Factor constraints 7.5.3 Constituent constraint
15、s Presentation style constituent contraints . 7.6.1 Macro definitions 7.6.2 Factor constraints 7.6.3 Constituent constraints Content portion constituent constraints 7.7.1 Macro definitions 7.7.2 Factor constraints 7.7.3 Constituent constraints 7 Layout constituent constraints 8 Interchange format .
16、8.1 Interchange format Encoding of application comments . 8.4 Data lengths Annex A - Amendments and technical corrigenda 8.2 8.3 Document application profile object identifier . A . 1 Amendments . A.l. 1 Amendments to the base standard . A.1.2 Proposed changes to standards due to defects A.2 Technic
17、al corrigenda A.2.1 Technical comgenda to this Recommendation . A.3 Versions of the ODA Specification Annex B - Recommended practices . Transfer methods for ODA . B.l.l B.1.2 Conveyance of ODA over FTAM . B.1.3 B.1.4 Conveyance of ODA over flexible disks B.2 Font reference . B.l Conveyance of ODA ov
18、er CCITT Recommendation X.400-1984 . Conveyance of ODA over DTAM Page 47 47 47 48 48 50 50 50 50 51 52 54 55 55 58 62 62 66 66 71 71 73 75 85 85 86 86 88 88 88 88 89 89 90 90 91 91 91 91 91 92 92 92 92 92 92 92 93 93 93 93 93 93 94 11 Recommendation T.505 (11/94) B.3 ISOAEC 8632 (CGM) constraints fo
19、r this document application profile . B.3.1 Delimeter elements . B.3.2 Metafile descriptor elements . B.3.3 Picture descriptor elements . B.3.5 Graphical primitive elements B.3.4 Control elements . B.3.6 Attribute elements . B.3.7 External elements Annex C . Bibliography . Page 94 95 95 95 96 96 97
20、98 98 Recommendation T.505 (1V94) . 111 ITU-T RECMN*T=505 94 4862571 0599174 757 = SUMMARY This Recommendation specifies an ODA Document Application Profile (DAP) named PM-26. This Profile specifies an interchange format for the transfer of structured documents between equipments designed for word o
21、r document processing. Such documents may contain character, raster graphics and geometric graphics content. The documents that can be interchanged using this Profile range from simple documents to highly structured technical reports, articles and typeset documents such as brochures. This Profile pr
22、ovides a comprehensive level of features for the transfer of documents between these systems. A document structured in accordance with this Profile is represented for interchange by the Open Document Interchange Format (ODIF), as defined in Recommendation T.415. iv Recommendation T.505 (11/94) ITU-T
23、 RECMN*T.505 94 9 4862593 0599375 693 W INTRODUCTION This Recommendation specifies an ODA Document Application Profile (DAP) named PM-26. The purpose of this Profile is to facilitate the interworking of applications interchanging documents based on ODA. T.410 Series of CCIT Rec. I ISO/IEC 8613. This
24、 Profile is suitable for interchanging documents in formatted form, processable form or formatted processable form and has been defined in accordance with CCITT Rec. T.411 I ISOAEC 8613-1. The format of this Profile is in accordance with the standardized proforma and notation defined in Annex F of C
25、CIT Rec. T.411 I ISOAEC 8613-1. Recommendation T.505 (1U94) V ITU-T RECMN*T.505 94 m 4862571 0577376 52T m Recommendation T.505 DOCUMENT APPLICATION PROFILE PM-26 FOR THE INTERCHANGE OF ENHANCED STRUCTURE, MIXED CONTENT DOCUMENTS IN PROCESSABLE AND FORMATTED FORMS*) (Geneva, 1991; amended in Geneva,
26、 1994) 1 Scope This Profile specifies an interchange format for the transfer of structured documents between equipments designed for word or document processing. Such documents may contain character, raster graphics and geometric graphics content. The documents that can be interchanged using this Pr
27、ofile range from simple documents to highly structured technical reports, articles and typeset documents such as brochures. This Profile provides a comprehensive level of features for the transfer of documents between these systems. This Profile allows documents to be interchanged in the following f
28、orms: - formatted form; - processable form; - formatted processable form. The architecture levels defined for these three forms have matching functionalities so that the interchange formats of a document are convertible from a processable form to any other form. This Profile is independent of the pr
29、ocesses carried out in an end system to create, edit or reproduce documents. It is also independent of the means to transfer documents which, for example, may be by means of communication links or storage media. A document structured in accordance with this Profile is represented for interchange by
30、the Open Document Interchange Format (ODIF), as defined in CCITT Rec. T.415 i ISOAEC 8613-5. 2 Normative references The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. All Recommendations and
31、 other references are subject to revision; as a general rule, all users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. However, users are warned against automatically applyin
32、g any more recent editions of the Recommendations and other references listed below, since the nature of the references made by this Recommendation to such documents is that it may be specific to a particular edition. Members of IEC and IS0 maintain registers of currently valid International Standar
33、ds and ISPs, and ITU-T maintains published editions of its current Recommendations. 2.1 Paired Recommendations I International Standards equivalent in technical content - CCITT Recommendation T.411 (1988), Open Document Architecture (ODA) and interchange format - Introduction and general principles.
34、 IS0 8613-1: 1989, Information processing - Text and ofSice systems - Once Document Architecture (ODA) and interchange format - Part I: Introduction and general principles. Recommendation T.505 is technically alyned with ISO/IEC ISP 11 181-1:1993. Recommendation T.505 (11/94) 1 ITU-T RECMN*T.505 94
35、= 4862573 O599377 466 W - CCITT Recommendation T.411 Annex F (1991), Open Document Architecture (ODA) and interchange format: Introduction and general principles - Annex F: Document Application Profile Proforma and Notation. IS0 8613-1 Add.1: Information processing - Text and ofJice systems - OfJice
36、 Document Architecture (ODA) and interchange format - Part I: Introduction and general principles - Addendum 1: Document Application Profile Proforma and Notation. CCIT Recommendation T.412 (1988), Open Document Architecture (ODA) and interchange format - Document structures. - IS0 8613-2:1989, Info
37、rmation processing - Text and ofice systems - Ofice Document Architecture (ODA) and interchange format - Part 2: Document structures. CCITT Recommendation T.414 (1988), Open Document Architecture (ODA) and interchange format - Document profile. IS0 8613-4:1989, Information processing - Text and ofic
38、e systems - OfJice Document Architecture (ODA) and interchange format - Part 4: Document profile. CCITT Recommendation T.415 (1988), Open Document Architecture (ODA) and interchange format - Open Document Interchange Fomt (ODIF). IS0 8613-5:1989, Information processing - Text and ofJice systems - Of
39、Jice Document Architecture (ODA) and interchange format - Part 5: OfSice Document Interchange Format (ODIF). CCITT Recommendation T.416 (1988), Open Document Architecture (ODA) and interchange format - Character content architectures. - - - IS0 8613-6:1989, Information processing - Text and ofJice s
40、ystems - Ofice Document Architecture (ODA) and interchange fonnat - Part 6: Character content architecture. CCITT Recommendation T.417 (1988), Open Document Architecture (ODA) and interchange format - Raster graphics content architectures. IS0 8613-7:1989, Information processing - Text and ofJice sy
41、stems - Office Document Architecture (ODA) and interchange format - Part 7: Raster graphics content architecture. CCITT Recommendation T.418 (1988), Open Document Architecture (ODA) and interchange format - Geometric graphics content architectures. IS0 8613-8:1989, Information processing - Text and
42、ofice systems - Ofice Document Architecture (ODA) and interchange format - Part 8: Geometric graphics content architecture. CCITT Recommendation X.208 (1988), Specification of Abstract Syntax Notation One (ASN. I). ISO/IEC 8824: 1990, Information Technology - Open Systems Interconnection - Specifica
43、tion of Abstract Syntax Notation One (ASN. I). CCIT Recommendation X.209 (1988), Specification of basic encoding rules for Abstract Syntax Notation One (ASN.1). ISO/IEC 8825: 1990, Information technology - Open Systems Interconnection - Specification of basic encoding rules for Abstract Syntax Notat
44、ion One (ASN.1). ITU-T Recommendation T.502 (1994), Document application profile PM-I1 for the interchange of simple structure, character content documents in processable and formatted forms. ISODEC ISP 10610-1 : 1993, Information technology - International Standardized Profile FODII - Open document
45、 format: Simple document structure - Character content architecture only - Part 1: Document Application Profile (DAP). ITU-T Recommendation T.506 (1993), Document application profile PM-36 for the interchange of extended document structures and mixed content documents in processable and formatted fo
46、rms. ISOIIEC ISP 11 182-1: 1993, Information technology - International Standardized Profile FOD36 - Open document format: Extended document structure - Character, raster graphics and geometric graphics content architectures - Part I: Document Application Profile (DAP). - - - - - - 2 Recommendation
47、T.505 (11/94) - CCITT Recommendation T.50 (1992). International Reference Alphabet (IRA) - Information technology - 7-bit coded character set for information interchange. ISO/IEC 646: 1991, Information technology - IS0 7-bit coded character set for information interchange. CCITT Recommendation T.51
48、(1992), Latin based coded character sets for telematic services. IS0 6937: 1994, Information technology - Coded graphic character set for the communication of texts using the Lutin alphabet. - 2.2 Additional references - CCITT Recommendation T.4 (1988), Standardization of group 3 facsimile apparatus
49、 for document transmission. CCITT Recommendation T.6 (1988), Facsimile coding schemes and coding controlfunctions for group 4 facsimile apparatus. IS0 2022:1986, Information processing - IS0 7-bit and - the data stream shall be structured in accordance with the interchange format defined in clause 8; - the document, as represented by the data stream after resolution of any external references, shall be structured in accordance with one of the documents architecture classes as defined in 6.1 and shall contain all mandatory constituents specified for that class; other constituents may b
