JUS B H3 010-1987 Reference fluids for viscosimeters calibration Classification and specification《校准粘度计用参考流体的分类和规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 8486-2-2012 Bonded abrasives - Determination and designation of grain size distribution - Part 2 Microgrits F230 to F2000 (ISO 8486-2 2007)《粘合磨料 粒度分布测定和标识 第2部分 F230至F2000磨粒.pdf

DIN ISO 8488-2016 Cycles - Screw threads used to assemble head fittings on bicycle forks (ISO 8488 1986)《自行车 自行车前叉上用于装配前叉合件的螺纹(ISO 8488-1986)》.pdf

DIN ISO 8489-1-1997 Textile machinery and accessories - Cones for cross winding - Part 1 Recommended main dimensions (ISO 8489-1 1995)《纺织机械和附件 锥形筒管 第1部分 推荐的主要尺寸》.pdf

DIN ISO 8489-2-1997 Textile machinery and accessories - Cones for cross winding - Part 2 Dimensions tolerances and designation of cones with half angle 3 30 (ISO 8489-2 1995)《纺织机械和.pdf

DIN ISO 8489-3-1997 Textile machinery and accessories - Cones for cross winding - Part 3 Dimensions tolerances and designation of cones with half angle 4 20 (ISO 8489-3 1995)《纺织机械和.pdf

DIN ISO 8489-4-1997 Textile machinery and accessories - Cones for cross winding - Part 4 Dimensions tolerances and designation of cones with half angle 4 20 for winding for dyeing .pdf

DIN ISO 8489-5-1997 Textile machinery and accessories - Cones for cross winding - Part 5 Dimensions tolerances and designation of cones with half angle 5 57 (ISO 8489-5 1995)《纺织机械和.pdf

DIN ISO 8525-2013 Airborne noise emitted by machine tools - Operating conditions for metal-cutting machines (ISO 8525 2008)《机械工具发出的空气噪声 金属切割机的运行条件(ISO 8525-2008)》.pdf

DIN ISO 8528-7-1997 Reciprocating internal combustion engine driven alternating current generating sets - Part 7 Technical declarations for specification and design (ISO 8528-7 199.pdf