JUS C T7 113-1991 MetalJic coatings Electrodeposlted coatlngs of nlckel《金属涂层 镍电镀层》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CNS 4252-1978 Spring Washers Curved or Crinkle Type《反向曲线形或波浪形弹簧垫圈（高压缩负荷弹簧垫圈）》.pdf

CNS 4253-1978 Split Taper Pins《开口推拔销》.pdf

CNS 4254-1978 Machine Tools Internal Tab Washers for Slotted Round Nuts for Hook Spanner《夹转螺帽用内爪垫圈》.pdf

CNS 4255-1978 Spring Washers with Safety Ring《安全环弹簧垫圈》.pdf

CNS 4256-1988 Inter-locking Side Milling Cutters《扣联侧铣刀》.pdf

CNS 4257-1978 Inserted Blade Side Milling Cutters《镶刃侧铣刀》.pdf

CNS 4258-1978 Cemented Carbide Face Milling Cutters with Inserted Blade (for Cast Iron Use)《碳化物镶片正面铣刀（铸造用）》.pdf

CNS 4259-1982 Accuracy Inspection of Knee Type Horizontal Milling Machines and Universal Milling Machines《膝型卧式铣床及万能铣床精度检验标准》.pdf

CNS 4260-1982 Accuracy Inspection of Knee Type Vertical Milling Machines《膝型立式铣床精度检验标准》.pdf