JUS F B2 141-1978 Polypropylene filament yarn Quality requirements《聚丙烯长丝 质量要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 19511-1974 Centring bashing for faced chill moulds Construction and dimensions《表面冷铸模用定心衬套 结构及尺寸》.pdf

GOST 19512-1974 Guide bushe for faced chill moulds Construction and dimensions《表面冷铸模用导套 结构及尺寸》.pdf

GOST 19513-1974 Faced chill moulds Loose pins for gated patterns Construction and dimensions《表面冷铸模 整套模用定心销 结构及尺寸》.pdf

GOST 19514-1974 Faced chill moulds Guide pins for gated patterns Construction and dimensions《表面冷铸模 整套模用导销 结构及尺寸》.pdf

GOST 19515-1974 Faced chill moulds Centring bushing for gated patterns Construction and dimensions《表面冷铸模 整套模用定心套 结构及尺寸》.pdf

GOST 19516-1974 Faced chill moulds Guide bushe for gated patterns Construction and dimensions《表面冷铸模 整套模用导套 结构及尺寸》.pdf

GOST 19521-1974 Welding of metals Classification《金属焊接 分类》.pdf

GOST 19522-1974 Technical ammonium thiocyanate Specifications《工业用硫氰酸铵 技术条件》.pdf

GOST 19527-1974 Diamond bits for drilling of exploratory wells Main sizes《地质勘探钻井用金刚钻头 基本尺寸》.pdf