JUS G S2 147-1990 Rubber vulcanized Determination of stress relaxation in compression at ambient and at elevated temperatures《硫化橡胶 在环境温度和高温条件下压缩后应力松弛的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 846-14-2012 Methods of test for ancillary components for masonry Determination of the initial shear strength between the prefabricated part of a composite lintel and the maso.pdf

BS EN 846-2-2000 Methods of test for ancillary components for masonry - Determination of bond strength of prefabricated bed joint reinforcement in mortar joints《圬工辅助砌块的试验方法 灰浆连接处预制.pdf

BS EN 846-3-2000 Methods of test for ancillary components for masonry - Determination of shear load capacity of welds in prefabricated bed joint reinforcement《圬工辅助砌块的试验方法 预制基地加固处接头.pdf

BS EN 846-4-2002 Methods of test for ancillary components for masonry - Determination of load capacity and load-deflection characteristics of straps《圬工辅助部件的试验方法 固定夹板的负载容量和负载偏离特性的测定.pdf

BS EN 846-5-2012 Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (cou.pdf

BS EN 846-6-2012 Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (sin.pdf

BS EN 846-7-2012 Methods of test for ancillary components for masonry Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couple.pdf

BS EN 846-8-2000 Methods of test for ancillary components for masonry - Determination of load capacity and load-deflection characteristics of joist hangers《圬工辅助砌块的试验方法 小梁吊架的负载容量和负载.pdf

BS EN 847-3-2013 Tools for woodworking Safety requirements Clamping devices《木工工具 安全性要求 夹紧装置》.pdf