JUS H G8 388-1989 Reagents Calciur nitrate tetrahydrate Deternination of bariun content Turbidinetric nethod《试剂 四水合硝酸钙 钡含量的测定 比浊法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D627-A-2010 POLYCARBONATE (PC) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚碳酸酯(PC）模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D1053-A1 福特WSS-M4D1053-A2]》.pdf

FORD WSB-M4D634-A-2010 POLYPHENYLENE ETHER (PPE) MODIFIED MOLDING COMPOUND 16% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《16%玻璃纤维增强的聚苯醚（PPE）改性成型料 与标准FORD WSS-M9.pdf

FORD WSB-M4D636-A2-2012 POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D638-A-2006 POLYPROPYLENE (PP) MOLDING COMPOUND COLOR PIGMENTED LOW GLOSS UV STABILIZED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D638-B)《汽车内部用对紫外线稳定的低光泽.pdf

FORD WSB-M4D640-A-2010 POLYPROPYLENE (PP) IMPACT MODIFIED 35% CHEMICALLY COUPLED GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《35%化学交联玻璃纤维 .pdf

FORD WSB-M4D650-A-2009 THERMOPLASTIC POLYURETHANE POLYCARBONATE (TPU+PC) BLEND MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热塑性聚氨酯 聚碳酸酯（TPU+PC）混合物成型料 与标准FORD WSS-M99P11.pdf

FORD WSB-M4D658-A-2003 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED 10% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚苯醚+聚酰胺混合物(.pdf

FORD WSB-M4D658-A2-2010 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED 10% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚亚苯基乙醚+聚酰胺.pdf

FORD WSB-M4D662-A-2010 POLYAMIDE (PA) 66 IMPACT MODIFIED 20% PTFE POWDER FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%聚四氟乙烯(PTFE)粉末填充的聚酰胺66冲击改性成型料 与标准FORD WSS.pdf