JUS H N8 142-1988 Pulps Laboratory beating Jokro mili method《纸浆 实验室打浆 约克罗（Jokro）六辊磨浆机》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS G S2 625-1982 Plastics Determination of enov iron mental stress cracking (ESC) Ball or pin inpression method《塑料 环境应力开裂性的测定（ESC） 球状压痕或销钉压痕法》.pdf

JUS G S2 630-1991 Plastics Determination of stiffness in torsion of flexible materials General method《塑料 可弯曲材料的扭曲刚度的测定 一般方法》.pdf

JUS G S2 631-1991 Plastics Determination of stiffness in torsion of flexible materials Application to plasticized compounds of homopolymers and copolymers of vinvl chloride《塑料 可弯曲材.pdf

JUS G S2 637-1985 Plastics Testing of industrial laminates Wedging test for industrial laminated sheets《塑料 工业用层压材料检测 工业用层压板的锤击韧性检测》.pdf

JUS G S2 638-1985 Plastics Hole test on sheets 《塑料 板材钻孔测试》.pdf

JUS G S2 639-1984 Plastics Determination of temperature deflection under load Martens method《塑料 在负荷情况下的温度-挠度的测定Martens法》.pdf

JUS G S2 640-1991 Plastics and abonite Determination of temperature of deflection under load《塑料和硬橡胶 无负荷时挠曲温度的测定》.pdf

JUS G S2 641-1991 Pastics Thermoplastic materials Determination of Vicat softening temperature《塑料，热塑料材料，维卡特软化温度的测定》.pdf

JUS G S2 657-1988 Plastics and rubber Methods of exposure to laboratory light sources《塑料和橡胶 暴露于实验室光源的检测方法》.pdf