JUS K D0 065-1995 Collets for tool holder with taper 1 10《锥度为1：10的刀夹的夹头》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN ISO 11844-2-2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2 Determination of corrosion attack in indoor atmospheres (I.pdf

DIN EN ISO 11844-3-2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3 Measurement of environmental parameters affecting indoor c.pdf

DIN EN ISO 11846-2008 Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys (ISO 11846 1995) German ve.pdf

DIN EN ISO 11850-2016 Machinery for forestry - General safety requirements (ISO 11850 2011 + Amd 1 2016) German version EN ISO 11850 2011 + A1 2016《林业机械基本安全性要求(ISO 11850-2011+Amd 1.pdf

DIN EN ISO 11855-1-2016 Building environment design - Design dimensioning installation and control of embedded radiant heating and cooling systems - Part 1 Definition symbols and c.pdf

DIN EN ISO 11855-2-2016 Building environment design - Design dimensioning installation and control of embedded radiant heating and cooling systems - Part 2 Determination of the des.pdf

DIN EN ISO 11855-3-2015 Building environment design - Design dimensioning installation and control of embedded radiant heating and cooling systems - Part 3 Design and dimensioning .pdf

DIN EN ISO 11855-4-2016 Building environment design - Design dimensioning installation and control of embedded radiant heating and cooling systems - Part 4 Dimensioning and calcula.pdf

DIN EN ISO 11855-5-2015 Building environment design - Design dimensioning installation and control of embedded radiant heating and cooling systems - Part 5 Installation (ISO 11855-.pdf