JUS N A5 732-1984 Bask environmental testing procedures Test Fda Random vi brat ion wide band Reproducibility High《基本环境测试程序 测试Fda：宽频带随机振动 高再现性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 4574.1-1992 冲模安全控制装置 导正孔控制微动开关装置.pdf

HB 4574.2-1992 冲模安全控制装置 导正孔控制光电传感器装置.pdf

HB 4574.3-1992 冲模安全控制装置 侧刃切口控制微动开关装置.pdf

HB 4574.4-1992 冲模安全控制装置 探针控制装置.pdf

HB 4576-1992 二齿立铣刀用槽铣刀 D=40～56mm.pdf

HB 4580-1992 四齿立铣刀用槽铣刀 D=40～75mm.pdf

HB 4581-1992 四齿立铣刀槽铣刀用样板和校对样板 检测HB 4580-92槽铣刀用.pdf

HB 4582-1992 六齿立铣刀用槽铣刀 D=56～80mm.pdf

HB 4587-1992 加工轻合金二齿立铣刀用槽铣刀 D=30～75mm.pdf