JUS P R1 107-1989 Mine loading cars Wheel Technical requirements for manufacture《矿山装载车 轮子 制造用技术要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JIS B6334-1986 Test Code for Performance and Accuracy of Numerically Controlled Horizontal Boring Machines (Table Type).pdf

JIS B6335-1986 数控外圆磨床和万能磨床性能和加工精度试验规程.pdf

JIS B6336-1-2000 Test conditions for machining centers-Part1：Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis).pdf

JIS B6336-2-2002 Test conditions for machining centres-Part 2：Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis).pdf

JIS B6336-3-2000 Test conditions for machining centers-Part 3：Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis).pdf

JIS B6336-4-2000 Test conditions for machining centers-Part 4：Accuracy and repeatability of positioning of linear and rotary axes.pdf

JIS B6336-5-2000 Test conditions for machining centers-Part 5：Accuracy and repeatability of positioning of work-holding pallets.pdf

JIS B6336-6-2000 Test conditions for machining centers-Part 6：Accuracy of feeds, speeds and interpolations.pdf

JIS B6336-7-2000 Test conditions for machining centers-Part 7：Accuracy of a finished test piece.pdf