JWWA G116-2007 Stainless steel tubes fittings for water supply《供水系统用不锈钢管配件》.pdf

相关资源

JIS G3468-2004 大口径焊接不锈钢管.pdf

JIS G3447-2004 环境卫生用不锈钢管.pdf

JIS G3448-1980 一般管道用不锈钢管.pdf

DL T 1324-2014 锅炉奥氏体不锈钢管内壁氧化物堆积磁性检测技术导则.pdf

CB T 4154-2011 船用不锈钢管简选系列.pdf

CB T 4201-2011 不锈钢管对焊接头.pdf

CECS 229-2008 自动喷水灭火系统薄壁 不锈钢管管道工程技术规程.pdf

CECS 277-2010 建筑给水排水薄壁不锈钢管 连接技术规程.pdf

EJ T 410-1999 压水堆核电厂—回路工艺系统冷轧、冷拔无缝不锈钢管技术条件.pdf

CB T 4113-2016 船舶不锈钢管对接焊技术要求.pdf

猜你喜欢

GOST 28041-1989 Crossovers section insulators frogs for tramway and trolleybus catenary suspensions General technical requirements《电车和无轨电车接触电线路的交叉点 分段绝缘子和转辙器 一般技术要求》.pdf

GOST 28043-1989 Personal computers Removable heads hard fixed disk drive interface General requirements《个人电子计算机 硬磁盘存储器移动头间的接口 一般要求》.pdf

GOST 28044-1989 Internal broaches for straight splines based at internal diameter one pass combined type Construction《内径定心直齿十键孔用交替切削装配式拉刀 结构》.pdf

GOST 28045-1989 Internal broaches for straight splines based at internal diameter dauble pass combined type Construction《内径定心直齿十键孔用两次拉削成形的交替切削组合拉刀 结构》.pdf

GOST 28046-1989 Internal broaches for straight splines based at internal diameter three pass combined type Construction《内径定心直齿十键孔用三次拉削成型的交替切削装配式组合拉刀 结构》.pdf

GOST 28047-1989 Internal broaches for straight splines based at internal diameter four pass combined type Construction《内径定心直齿十键孔用四次拉削成形的交替切削装配式组合拉刀 结构》.pdf

GOST 28048-1989 Broaches with diameter from 50 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with modul frome 1 5 to 2 5 mm Co.pdf

GOST 28049-1989 Broaches with diameter from 90 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with modul from 2 5 mm Constructi.pdf

GOST 28050-1989 Broaches with diameter from 55 to 130 mm for slitting holes with involute profile with round tail and centring at outside diameter with modul from 3 to 5 mm Constru.pdf