KS 05-244 Pt 10-1981 KENYA STANDARD METHOD OF ANALYSIS OF FOODS FOR VITAMINS PART 1G METHODS FOR ESTIMATION OF NICOTINIC ACID (NIACIN) IN FOODSTUFFS《肯尼亚食物中维他命的标准分析方法 第1G部分：食品中烟酸（尼亚.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 27 004-1985 Industrial product dependability Technological systems Terms and definitions《工业品可靠性 技术系统 术语和定义》.pdf

GOST 27 202-1983 Reliability in technique Technological systems Methods of reliability evaluation by parameters of product quality《技术可靠性 技术系统 利用产品质量参数评估可靠性的方法》.pdf

GOST 27 203-1983 Reliability in technique Technological systems General requirements for the methods of reliability estimation《工程可靠性 工艺系统 对可靠性评价方法的一般要求》.pdf

GOST 27 204-1983 Industrial product dependability Technological systems Technical requirements for methods of reliability evaluation on productivity parameters《工程可靠性 工艺系统 对按生产率参数评价.pdf

GOST 27 301-1995 Dependability in technics Dependability prediction Basic principles《工程可靠性 可靠性的计算概念》.pdf

GOST 27 310-1995 Dependability in technics Failure mode effects and criticality analisys Basic principles《工程可靠性 故障类型、原因及临界性分析；概述》.pdf

GOST 27 402-1995 Dependability in technics Compliance test plans for mean time between failures (to failure) Part 1 Exponential case《工程中的可靠性 用以检验到达极限之前的平均使用寿命的试验计划 第1部分 指数分布》.pdf

GOST 27-1988 Surface grinders with circular sliding table and vertical spindle Basic dimensions Standards of accuracy and rigidity《圆台立轴平面磨床 精度及刚度规范》.pdf

GOST 270-1975 Rubber Method of the determination elastic and tensile stress-strain properties《橡胶 弹性和张拉应力应变特征的测定方法》.pdf