MI 4900 14-1980 《物理数量名称，标志以及标志解释》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D2148-2002e1 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation《电绝缘用可粘结硅橡胶带的标准试验方法》.pdf

ASTM D2148-2013 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation《电绝缘用可粘结硅橡胶带的标准试验方法》.pdf

ASTM D2149-2013 Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500&176.pdf

ASTM D2152-1995(2003) Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion《用丙酮浸渍法测定挤压制聚氯乙烯管(PVC)和模制配件溶合度.pdf

ASTM D2152-1995(2010) Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion《用丙酮浸渍法测定挤压制聚氯乙烯管(PVC)和模制配件溶合度.pdf

ASTM D2152-2013 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion《用丙酮浸渍法测定挤压制聚氯乙烯(PVC)管和模制配件溶合度的标准试验方.pdf

ASTM D2152-2017 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion《用丙酮浸渍法测定挤出聚氯乙烯(PVC)管和模制配件熔合充分性的标准试验.pdf

ASTM D2155-2012 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature《通过自燃温度测定飞机液压液耐火性的标准试验方法》.pdf

ASTM D2156-1994(2003) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels《燃料馏分燃烧产生的烟道气中烟密度的标准测试方法》.pdf