MS 183-2001 Specification for industrial safety helmet(first revision)《工业安全防护帽规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM G36-1994(2013) Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution 《评估在沸腾的氯化镁溶液中金属及合金的抗应力-腐蚀-断裂.pdf

ASTM G37-1998(2004) Standard Practice for Use of Mattssons Solution of pH 7 2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys《用pH值为7 2的玛特松(mattssons.pdf

ASTM G37-1998(2011) Standard Practice for Use of Mattssons Solution of pH 7 2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys《用pH值为7 2的玛特松(mattssons.pdf

ASTM G37-1998(2016) Standard Practice for Use of Mattssons Solution of pH 7 2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys《用于评估铜锌合金应力腐蚀开裂敏感性的pH值为7.pdf

ASTM G38-2001(2007) Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens《C-环形应力腐蚀试样的制作和使用的标准实施规程》.pdf

ASTM G38-2001(2013) Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens《制作和使用C环应力腐蚀试样的标准实施规程》.pdf

ASTM G39-1999(2005) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens《曲梁应力腐蚀试样制备和使用的标准实施规程》.pdf

ASTM G39-1999(2011) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens《曲梁应力腐蚀试样的制备和使用的标准操作规程》.pdf

ASTM G39-1999(2016) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens《弯梁应力腐蚀试件的制备和使用的标准实施规程》.pdf