MSZ 05 26 2480-1982 《MSZ-05 26 2480-82 随机铣刀》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA MS51531 REV B VALID NOTICE 2-2013 Nut Tube Coupling 37 Degrees Flared [Use SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SA.pdf

DLA MS51531 REV B-1985 NUT TUBE COUPLING 37 DEGREE [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《37度螺母管接头》.pdf

DLA MS51532 REV B NOTICE 1-1999 FITTINGS HYDRAULIC TUBE FLARED 37 DEGREE AND FLARELESS STEEL CAP TUBE 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《 37度扩.pdf

DLA MS51532 REV B VALID NOTICE 2-2013 Fittings Hydraulic Tube Flared 37 Degree and Flareless Steel Cap Tube 37 Degree Flared [Use SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J.pdf

DLA MS51532 REV B-1988 FITTINGS HYDRAULIC TUBE FLARED 37 DEGREE AND FLARELESS STEEL CAP TUBE 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《 37度扩口式液压管配件和钢.pdf

DLA MS51533 REV A NOTICE 1-1999 SLEEVE COMPRESSION TUBE FITTING 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《 37度扩口式管配件 压紧管套》.pdf

DLA MS51533 REV A VALID NOTICE 2-2013 Sleeve Compression Tube Fitting 37 Degrees Flared [Use SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J5.pdf

DLA MS51533 REV A-1979 SLEEVE COMPRESSION TUBE FITTING 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《 37度扩口式管配件 压紧管套》.pdf

DLA MS51534 REV A NOTICE 1-1999 REDUCER TUBE 37 DEGREE FLARED [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《 37度扩口式冷轧管》.pdf