MSZ 1264-1960 《钢制车床》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESF-M4D255-A-2011 ABS MOLDING COMPOUND - HIGH IMPACT TO BE USED WITH FORD WSS-M99P1111-A 《耐冲击力丙烯腈模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D827-B1]》.pdf

FORD ESF-M4D26-A-2009 TUBING VINYL - EXTRUDED TO BE USED WITH FORD WSS-M99P1111-A 《乙烯树脂挤塑管 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4D27-A-2009 TETRAFLUOROETHYLENE TO BE USED WITH FORD WSS-M99P1111-A 《四氟乙烯 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4D298-A-2006 POLYPROPYLENE MOLDING COMPOUND EXTRA HIGH IMPACT TO BE USED WITH FORD WSS-M99P1111-A 《超高抗冲性聚丙烯（PP）成型料 与标准FORD WSS-M99P1111-A一起使用 使用WSS-M4D938-A1》.pdf

FORD ESF-M4D305-A-2006 NYLON (TYPE 6) MOLDING COMPOUND NUCLEATED HEAT STABILIZED TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的晶核尼龙（型号6）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4D325-A-2006 NYLON (TYPE 6) COPOLYMER 20% GLASS - MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%玻璃增强的尼龙（型号6）共聚物成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4D335-A-2007 NYLON (TYPE 66) 43% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《43%玻璃纤维增强的尼龙（型号6） 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSK-M4D673-A FORD W.pdf

FORD ESF-M4D341-C-2009 POLYESTER THERMOPLASTIC (PBT) 15% GLASS FILLED TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃填充的热塑性聚酯(聚对苯二甲酸丁二醇酯(PBT)) 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WS.pdf

FORD ESF-M4D354-A6-2010 POLYBUTYLENE TEREPHTHALATE 17% GLASS FIBER REINFORCED - SELF EXTINGUISHING TO BE USED WITH FORD WSS-M99P1111-A 《17%玻璃纤维增强的自熄型聚对苯二甲酸丁二醇酯 与标准FORD WSS-M99P1.pdf