MSZ 1540-1963 《直板手工剪子》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 19920 6-1974 Stereoregular butadiene synthetic rubbers Method for determination of alcohol-toluene extract mass fraction《立体定向丁二烯合成橡胶 酒精甲苯萃取物量值测定法》.pdf

GOST 19920 7-1974 Stereoregular butadiene synthetic rubbers Method for determination of presence of mechanical inclusions and insoluble polymer impurities《立体定向丁二烯合成橡胶 机械杂质和不溶解聚合物杂质.pdf

GOST 19920 8-1974 Stereoregular butadiene synthetic rubbers Method for determination of naphtham-2 mass percentage in oil-black- and oil-extended rubbers《立体定向丁二烯合成橡胶 加炭黑油和加油橡胶中苯基萘胺.pdf

GOST 19921-1974 Glued and bent blanks Method of determining ultimate strength in static bending《胶合的弯曲坏件 静弯曲强度极限测定法》.pdf

GOST 19922-1974 Wood Glued and bent blanks Method of determining ultimate strength of glue jointing between bosses and veneer in trapezoid frames of chairs《胶合的弯曲坯件 椅子梯形边圈用的带键销的凸块的胶.pdf

GOST 19927-1974 Plastics Methods for determination of refraction coefficient《塑料 折光指数测定法》.pdf

GOST 19930-1991 Sewing domestic machines General specifications《日常用缝纫机 一般技术条件》.pdf

GOST 19932-1999 Petroleum products Determination of carbon residue Conradson method《石油产品 残碳的测定。 康氏法》.pdf

GOST 19933-1974 General-duty units of dies for die casting Design and dimensions《压力铸造万能式压模组件 结构及尺寸》.pdf