MSZ 18 3-1984 《维布图纸绘画复制品折叠》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D741-A1-2006 POLYPROPYLENE (PP) COPOLYMER COOLING AGENT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D969-A)《聚丙烯(PP)共聚物耐冷却剂(和FORD WSS-M99P1111-A一起使用)使用WSS-.pdf

FORD WSK-M4D741-A2-2012 POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《抗冷却剂的聚丙烯(PP)均聚物 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D741-B1]》.pdf

FORD WSK-M4D741-A3-2006 POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D741-A2)《耐冷却液的聚丙烯（PP）均聚物 与标准FORD WSS-M99P1111-A一起使用.pdf

FORD WSK-M4D742-A-2006 POLYAMIDE (PA) 6 EXTRUSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚酰胺6挤塑成型料 与标准FORD WSS-M99P1111-A一起使用 [替代 FORD ESA-M4D331-A FORD ESA-M4D3.pdf

FORD WSK-M4D743-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 40% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSB-M4D678-A)《40%玻璃纤维增强的受热稳定的聚酰胺66成型.pdf

FORD WSK-M4D744-A-2011 ACETAL (POM) HOMOPOLYMER UV STABILIZED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部紫外线稳定的模塑材料乙缩醛(POM)共聚物 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D744-A2-2011 ACETAL (POM) HOMOPOLYMER COLOR PIGMENTED MOLDING COMPOUND MELT FLOW RATE 11 - 17 INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部着色熔态流动率为11-17的乙缩醛(POM)共聚物.pdf

FORD WSK-M4D745-A-2011 ABS MOLDING COMPOUND HIGH HEAT RESISTANT HIGH IMPACT STRENGTH INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部耐高温耐冲击强度丙烯腈模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福.pdf

FORD WSK-M4D745-A2-2011 ABS MOLDING COMPOUND HIGH HEAT RESISTANCE HIGH IMPACT STRENGTH EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《外部耐高温耐冲击强度丙烯腈模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf