MSZ 4511 3-1983 《盘状磨刀环平底环的主规格》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 10051-2010 Continuously hot-rolled strip and plate sheet cut from wide strip of non-alloy and alloy steels Tolerances on dimensions and shape《非合金钢和合金钢连续热轧的未涂覆板材 薄板材和带材规范 尺寸规格.pdf

BS EN 10055-1996 Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions《带圆角齿根和齿顶的热轧钢等边二层交错凸缘 尺寸和形状及尺寸公差》.pdf

BS EN 10056-1-2017 Structural steel equal and unequal leg angles Dimensions《等角和非等角结构钢 尺寸》.pdf

BS EN 10056-2-1993 Specification for structural steel equal and unequal angles - Tolerances on shape and dimensions《等边和不等边结构角钢 形状和尺寸公差》.pdf

BS EN 10058-2003 Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions《一般用途热轧扁钢棒 尺寸及形状和尺寸公差》.pdf

BS EN 10059-2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions《一般用途热轧方形钢棒 尺寸及形状和尺寸公差》.pdf

BS EN 10060-2003 Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions《一般用途热轧圆钢棒 尺寸及形状和尺寸公差》.pdf

BS EN 10061-2003 Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions《一般用途热轧六角钢棒 尺寸及形状和尺寸公差》.pdf

BS EN 10067-1997 Hot rolled bulb flats - Dimensions and tolerances on shape dimensions and mass《热轧球扁钢 尺寸及形状、尺寸和质量公差》.pdf