MSZ 52 3 lap-1966 《粘土屋面瓦片槽建材》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D731-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER 20% GLASS FIBER REINFORCED MELT FLOW RATE 10 - 18 TO BE USED WITH FORD WSS-M99P1111-A 《20%玻璃纤维加强 熔态流动率为10-18的聚丙烯(PP)均聚物 与福.pdf

FORD WSK-M4D732-A1-2012 POLYPROPYLENE (PP) HOMOPOLYMER 30% GLASS FIBER REINFORCED MELT FLOW RATE 0 5 - 4 0 TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D732-A2-2012 POLYPROPYLENE (PP) HOMOPOLYMER 30% GLASS FIBER REINFORCED MELT FLOW RATE 10 - 18 TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D737-A2-2010 POLYBUTYLENE TEREPHTHALATE (PBT) MODIFIED 30% GLASS FIBER REINFORCED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用30%玻璃纤维增强的聚对苯二甲酸丁.pdf

FORD WSK-M4D737-A3-2010 POLYBUTYLENE TEREPHTHALATE (PBT) MODIFIED 30% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D7.pdf

FORD WSK-M4D739-A-2006 POLYAMIDE (PA) 12 RIGID HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《刚性、受热稳定的聚酰胺12模塑和挤塑成型料 与标准FORD WSS-M99P1111-A一起.pdf

FORD WSK-M4D739-A2-2006 POLYAMIDE (PA) 12 RIGID HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《刚性、受热稳定的聚酰胺12成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D739-A3-2006 POLYAMIDE 12 (PA12) RIGID HEAT STABILIZED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用聚酰胺12（PA12）刚性、受热稳定的成型料 与标准FORD WSS-M99P1111.pdf

FORD WSK-M4D739-A4-2006 POLYAMIDE 12 (PA12) RIGID HIGH HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚酰胺12（PA12）刚性、受热稳定的成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf