MSZ 983-1960 《技术图纸计划建造供暖（热）装置符号》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 9129-2008 Motorcycles - Measurement methods for moments of inertia《摩托车 惯性矩的测量方法》.pdf

BS ISO 9130-2005 Motorcycles - Measurement method for location of centre of gravity《摩托车 重心位置的测量方法》.pdf

BS ISO 9136-1-2005 Abrasive grains - Determination of bulk density - Macrogrits《磨料颗粒 体密度的测定 粗磨粒》.pdf

BS ISO 9136-2-2000 Abrasive grains - Determination of bulk density - Microgrits《磨料粒度 堆积密度的测定 细磨粒》.pdf

BS ISO 9138-2015 Abrasive grains Sampling and splitting《研磨粒料 取样和裂解》.pdf

BS ISO 9154-2016 Aerospace Bolts with MJ threads made of heat-resistant nickel-based alloy strength class 1 550 MPa Procurement specification《航空航天 由强度等级为1550 MPa的耐热镍基合金制成的.pdf

BS ISO 9162-2013 Petroleum products Fuels (class F) Liquefied petroleum gases Specifications《石油产品 燃料(F类) 液化石油气 规格》.pdf

BS ISO 9181-2007 Tools for pressing - Round punches with 60 ° conical head and reduced shank《冲压工具 60°锥头缩径的圆冲头》.pdf

BS ISO 9182-1-2013 Tools for pressing Guide pillars Types《冲压工具 导柱 类型》.pdf