MSZ 10667-1959 《旋转工作钻探 符合匈牙利标准3180号转移到钻柱搜索》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D959-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER 30% CALCIUM CARBONATE FILLED HEAT STABILIZED 25% MIN POST CONSUMER CONTENT TO BE USED WITH FORD WSS-M99P1111-A 《30%碳酸钙填充热稳定.pdf

FORD WSS-M4D960-A-2006 ABS + POLYAMIDE BLEND (ABS+PA) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用丙烯腈-丁二烯-苯乙烯共聚物（ABS）+聚酰胺混合物成型料 与标准FORD WSS-M99P1111-A一起使.pdf

FORD WSS-M4D960-A2-2012 ABS + POLYAMIDE 6 BLEND (ABS + PA6) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D960-B1-2018 ABS + POLYAMIDE BLEND (ABS+PA) MOLDING COMPOUND IMPACT MODIFIED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D961-A1-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS EXTERIOR - TO .pdf

FORD WSS-M4D961-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS EXTERIOR TO B.pdf

FORD WSS-M4D961-A3-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW LOW CLTE FOR MOLDED-IN-COLOR AND FULLY-PAINTED APPLICATIONS EXTERIOR .pdf

FORD WSS-M4D961-A4-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% MINERAL COLOR PIGMENTED UV STABILIZED HIGH MELT FLOW LOW CLTE MOLD-IN-COLOR AND PARTIALLY PAINTED EXTERIOR TO .pdf

FORD WSS-M4D961-A5-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% MINERAL HIGH MELT FLOW LOW CLTE FULLY PAINTED EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用完全涂漆低线热胀系数、高.pdf