MSZ 5703-1968 《钢铁以及金属科技检测 盘和柱成型检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M91J9-A-2005 COATING HEAT RESISTANT BLACK TO BE USED WITH FORD WSS-M99P1111-A 《黑色耐热涂料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M98D18-B1-2006 LAMINATE POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) SKIN POLYETHYLENE (PE) FOAM RIGID SUBSTRATE FORMED TRIM ASSEMBLY TO BE USED WITH FORD WSS-M99P111-A 《成型内.pdf

FORD WSB-M98D18-B2-2006 LAMINATE POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) SKIN POLYPROPYLENE (TPO) FOAM RIGID SUBSTRATE FORMED TRIM ASSEMBLY TO BE USED WITH FORD WSS-M99P1111-A 《成.pdf

FORD WSB-M98D27-A-2010 POLYVINYL CHLORIDE (PVC) DRY BLEND SLUSH RIGID SUBSTRATE FORMED TRIM ASSEMBLY INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部干混合水泥砂浆 硬性基板形成修剪组件的聚氯乙烯(PVC) .pdf

FORD WSB-M98D31-A1-2006 LAMINATE POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) OR POLYVINYL CHLORIDE (PVC) SKIN POLYPROPYLENE (PP) FOAM LOW PRESSURE MOLDING TO BE USED WITH FORD WSS-M9.pdf

FORD WSB-M98D31-A2-2007 LAMINATE POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) OR POLYVINYL CHLORIDE (PVC) SKIN POLYOLEFIN FOAM POLYOLEFIN (PP) SKIN LOW PRESSURE MOLDING - TO BE USED W.pdf

FORD WSB-M98D32-A-2010 TUBING POLYVINYL CHLORIDE (PVC) COATED FABRIC ZIPLOCK TYPE TO BE USED WITH FORD WSS-M99P1111-A 《聚氯乙烯(PVC)涂层织物拉链袋型的管道 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M98P11-A2-2015 COATED WINDOW MOLDINGS EXTERIOR COMPONENTS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M99C120-A-2009 LUBRICANT DRY FILM PTFE IN WATER BASED POLYURETHANE BINDER TO BE USED WITH FORD WSS-M99P1111-A 《水基聚氨酯胶粘剂中的聚四氟乙烯（PTFE）、干膜润滑油 与标准FORD WSS-M99P1111-A一起使用 》.pdf