MSZ 7340-1960 《路障杆》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 19295-1973 Lubricating greases Method of mechanical stability determination《塑性润滑脂 机械稳定性测定法》.pdf

GOST 19296-1973 Petroleum oils Test for soda reaction from petroleum oils Photoelectric colorimeter method《石油 钠试样光电比色计测定法》.pdf

GOST 19297-2003 Treated for fire-resistance cotton fabrics Specifications《经过防火剂浸渍的棉布 技术条件》.pdf

GOST 19300-1986 Instruments for measurement of surface roughness by the profile method Contact profilographs and profilometers Types and main parameters《用轮廓法测量表面粗糙度的仪器 接触式表面光度仪 型式、.pdf

GOST 19306-1998 Centrifugal moulds with threaded shank and centrifugal locks Construction and dimensions《带螺纹柄和离心锁的离心铸模 结构及尺寸》.pdf

GOST 19308-1998 Centrifugal moulds with flange and centrifugal locks Construction and dimensions《带法兰和离心锁的离心铸模 结构及尺寸》.pdf

GOST 19309-1998 Centrifugal moulds with flange inserts and centrifugal locks Construction and dimensions《带法兰、衬套和离心锁的离心铸模 结构及尺寸》.pdf

GOST 19310-1998 Pushers for centrifugal moulds Construction and dimensions《离心铸模脱模器 结构及尺寸》.pdf

GOST 19311-1998 Caps for centrifugal moulds Construction and dimensions《离心铸模用盖 结构及尺寸》.pdf