MSZ 8176-1958 《钢门，外部标准框架》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F3290-2017 Standard Guide for Handling and Application of a Membrane Switch or Printed Electronic Device to its Final Support Structure《薄膜开关或印刷电子设备对最终支撑结构的处理和应用的标准指南》.pdf

ASTM F3291-2017 Standard Test Method for Measuring the Force-Resistance of a Membrane Force Sensor《测量薄膜力开关的力位移的标准试验方法》.pdf

ASTM F3293-2018 Standard Guide for Application of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices.pdf

ASTM F3298-2018 Standard Specification for Design Construction and Verification of Fixed-Wing Unmanned Aircraft Systems (UAS).pdf

ASTM F3299-2018 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P2O5 Sensor).pdf

ASTM F3300-2018 Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus《用往复式加重触针测定柔性包装薄膜耐磨性的标准试验方法》.pdf

ASTM F3301-2018 Standard for Additive Manufacturing &x2013 Post Processing Methods &x2013 Standard Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion《.pdf

ASTM F3301-2018a Standard for Additive Manufacturing &x2013 Post Processing Methods &x2013 Standard Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion.pdf

ASTM F3302-2018 Standard for Additive Manufacturing &x2013 Finished Part Properties &x2013 Standard Specification for Titanium Alloys via Powder Bed Fusion《添加剂制造标准&x2013 成品零件属性&x20.pdf