MSZ 8466-1981 《扣件主轴》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSD-M15H62-A-2009 THREAD POLYAMIDE THREE PLY TO BE USED WITH FORD WSS-M99P1111-A 《三股聚酰胺线 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M8P5-C］》.pdf

FORD WSD-M15P39-A-2010 PERFORMANCE FABRIC COVERED MOULDED PARTS TO BE USED WITH FORD WSS-M99P1111-A 《织物覆盖的模制部件的性能 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M15P39-B］》.pdf

FORD WSD-M17H166-A1-1995 PADDING NEEDLED POLYESTER FIBRE FABRIC REINFORCED《织物增强的聚酯纤维针刺垫》.pdf

FORD WSD-M17H166-A2-1995 PADDING NEEDLED POLYESTER FIBER FABRIC REINFORCED (Shown on WSD-M17H166-A1)《织物增强的聚酯纤维针刺垫 列于标准WSD-M17H166-A1上》.pdf

FORD WSD-M1A260-B1-2002 STEEL WIRE VALVE SPRING CHROMIUM VANADIUM ALLOY TO BE USED WITH FORD WSS-M99P1111-A 《铬钒合金钢阀弹簧钢丝 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSD-M1A260-B2-2002 STEEL WIRE VALVE SPRING CHROMIUM VANADIUM ALLOY DRESSED SURFACE TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M1A260-B1)《表面磨光的铬钒合金阀弹簧钢丝 与标准FORD WSS-M.pdf

FORD WSD-M1A276-A-2002 GRAY IRON CHILLED FACE TAPPET HARDENED AND TEMPERED TO BE USED WITH FORD WSS-M99P1111-A 《灰口铁淬火和回火、激冷处理的梃杆 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSD-M1A276-A2-2002 GREY IRON CHILLED FACE TAPPET AS CAST TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M1A276-A)《灰口铁激冷铸造挺杆 与标准FORD WSS-M99P1111-A一起使用 列于标准WSD-M1A276-A上.pdf

FORD WSD-M1A283-B1-2010 STEEL CROSS REFERENCE FOR STANDARD PARTS TO BE USED WITH FORD WSS-M99P1111-A 《钢 标准零件的对照检索 与福特WSS-M99P1111-A 一起使用》.pdf