MSZ 9640 4-1982 《油漆涂料和涂层系统检测 硬度检测使用K nig，Persoz方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS 4129-1967 《热水设备 上釉木制澡盆》.pdf

STAS 413-1968 《超过1千伏的航空电线 起保护作用导线的金属支架大小》.pdf

STAS 4130-1977 COPPER ROUND WIRE FOR ELECTROTECHNICAL PURPOSES General technical requirements for quality《电工圆形铜电线 一般质量技术要求》.pdf

STAS 4130-1977-1 《电机工程的圆形铜线 质量一般技术条件》.pdf

STAS 4131-1974 Railway vehicles GOILED SPRINGS General technical requirements for quality.《铁路车辆 缠绕弹簧 一般质量技术要求》.pdf

STAS 4133-1975 PROTECTIVE EQUIPMENT WADDED SUIT《带衬垫保护装置》.pdf

STAS 4134-1977 Petroleum equipment FIXED WORKOVER MASTS《石油开采设备 固定修井起重机》.pdf

STAS 4136 1-1980 SCREW PLUG GAUGES AND REFEREKCE GAUGES FOR METRIC SCREW THREADS FROM 1 TO 30 mm DIAMETERS Dimensions《直径1到30毫米的米制螺钉螺纹的螺纹塞规和参考量规》.pdf

STAS 4136 2-1980 SCREW PLUG GAUGES AND REFERENCE GAUGES FOR METRIC SCREW THREADS FROM 32 TO 100 mm DIAMETERS Dimensions《直径32到100毫米的米制螺钉螺纹的螺纹塞规和参考量规》.pdf