MSZ 15485 2-1980 《人造黄油检测 浸透检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 4L 56-1986 Specification for tube of aluminium-21 4% magnesium alloy (temper designation-O) (seamless tested hydraulically) (not exceeding 12 mm wall thickness)《铝-2%镁合金管规范(强度符号-.pdf

BS 4N 100-1-1999 Aircraft oxygen nsystems and nequipment — nPart 1 Design and installation《飞行器供氧系统和设备 设计和安装》.pdf

BS 4N 100-2-1999 Aircraft oxygen systems and equipment - Tests for the compatibility of materials in the presence of oxygen《飞行器供氧系统和设备 在有氧气情况下材料的兼容性试验》.pdf

BS 4N 100-3-1999 Aircraft oxygen systems and equipment - Testing of equipment and systems《飞行器供氧系统和设备 设备和系统的试验》.pdf

BS 4N 100-4-1999 Aircraft oxygen systems and equipment Guide to the physiological factors《飞行器供氧系统和设备 生理因素指南》.pdf

BS 4N 100-6-1999 Aircraft oxygen systems and equipment - Guidance and recommendations on the selection of materials for use with oxygen《飞行器供氧系统和设备 选择与氧一起使用的材料的指南和推荐方法》.pdf

BS 4S 106-1976 Specification - 3% chromium-molybdenum steel billets bars forgings and parts (930-1080 MPa limiting ruling section 150 mm) (suitable for nitriding)《3%铬钼钢方坯、棒材、锻件及零件规.pdf

BS 4S 500-2010 Aerospace series - Procedure for inspection testing and acceptance of steel sheet and strip《航空航天系列 钢板和钢带的检验、试验和验收用程序》.pdf

BS 500-2000 Steel sleepers《钢轨枕》.pdf