MSZ 16000 3 lap-1967 《农业建筑物地板，块状水泥地板（预制板）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JEDEC JEP147-2003 Procedure for Measuring Input Capacitance Using a Vector Network Analyzer (VNA)《使用适量网络分析(VNA)测试输入电容的程序》.pdf

JEDEC JEP148B-2014 Reliability Qualification of Semiconductor Devices Based on Physics of Failure Risk and Opportunity Assessment.pdf

JEDEC JEP149-2004 Application Thermal Derating Methodologies《热减额法应用》.pdf

JEDEC JEP150 01-2013 Stress-Test-Driven Qualification of and Failure Mechanisms Associated with Assembled Solid State Surface-Mount Components (Minor revision of JEP150 May 2005 Re.pdf

JEDEC JEP151-2015 Test Procedure for the Measurement of Terrestrial Cosmic Ray Induced Destructive Effects in Power Semiconductor Devices.pdf

JEDEC JEP152-2007 DDR2 DIMM Clock Skew Measurement Procedure Using A Clock Reference Board《使用时钟基准板的DDR2 DIMM时钟歪斜测试程序》.pdf

JEDEC JEP153A-2014 Characterization and Monitoring of Thermal Stress Test Oven Temperatures.pdf

JEDEC JEP154-2008 Guideline for Characterizing Solder Bump Electromigration under Constant Current and Temperature Stress.pdf

JEDEC JEP155A 01-2012 Recommended ESD Target Levels for HBM MM Qualification (Editorial Revision of JEP155A January 2012).pdf