MSZ 19238-1979 《1系列集装箱检验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS W ISO 9140-2005 Aerospace－Nuts plain or slotted(castellated)－Test methods《航空航天 普通或开槽螺母 试验方法》.pdf

KS W ISO 9152-2005 Aerospace－Bolts with MJ threads in titanium alloys strength class 1 100 MPa－Procurement specification 《航空航天 强度等级为1100 MPa的钛合金MJ螺纹螺栓 采购规范》.pdf

KS W ISO 9154-2005 Aerospace－Bolts with MJ threads made of heat-resistant nickel-based alloy strength class 1 550 MPa－Procurement specification《航空航天 由强度等级为1550 MPa的耐热镍基合金制成的带MJ螺纹的螺.pdf

KS W ISO 9216-2007 Aerospace-Nuts hexagonal slotted(castellated) for pulleys in alloy steel and cadmium plated or in corrosion- resistant steel and passivated-Dimensions and masses.pdf

KS W ISO 9217-2005 Aerospace-Washers chamfered with counterbore for pulleys in alloy steel and cadmium plated or in corrosion-resistant steel and passivated-Dimensions and masses 《.pdf

KS W ISO 9218-2005 Aerospace－Washers flat for pulleys in alloy steel and cadmium plated or in corrosion-resistant steel and passivated－Dimensions and masses《航空航天 滑轮用合金钢和镀镉或耐腐蚀钢和钝化平.pdf

KS W ISO 9219-2005 Aerospace-Bolts thin hexagonal head for pulleys close tolerance shank short thread in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or Dime.pdf

KS W ISO 9254-2005 Aerospace-Bolts normal spline head normal or pitch diameter shank long length MJ threads metallic material coated or uncoated strength classes less than or equal.pdf

KS W ISO 9255-2005 Aerospace-Bolts normal spline head normal shank short or medium length MJ threads metallic material coated or uncoated strength classes less than or equal to 1 1.pdf