MSZ 24233-1982 《氯化钠，用于分析》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESE-M1L100-B-2003 IGNITION CABLE HIGH TENSION RESISTANCE CORE (FIBER GLASS) SILICONE JACKET AND EPDM INSULATION (8 mm) TO BE USED WITH FORD WSS-M99P1111-A 《带电阻芯(玻璃纤维)硅树脂护套和三.pdf

FORD ESE-M1L102-A-2003 CABLE IGNITION - HIGH TENSION-RESISTANCE CORE (WIRE WOUND) SILICONE JACKET AND EPDM INSULATION (8 mm) TO BE USED WITH FORD WSS-M99P1111-A 《带电阻芯(线绕式)硅树脂护套和三.pdf

FORD ESE-M1L102-B-2002 CABLE IGNITION - HIGH TENSION - RESISTANCE CORE (WIRE WOUND) SILICONE JACKET AND EPDM INSULATION (8 MM) TO BE USED WITH FORD WSS-M99P1111-A 《带电阻芯(线绕式)硅树脂护套.pdf

FORD ESE-M1L115-A-2003 IGNITION CABLE HIGH TENSION RESISTANCE CORE (FIBER GLASS) SILICONE JACKET AND EPDM INSULATION (8 mm) TO BE USED WITH FORD WSS-M99P1111-A 《带电阻芯(玻璃纤维)硅树脂护套和三.pdf

FORD ESE-M1L116-A-2003 IGNITION CABLE - HIGH TENSION - RESISTANCE CORE (WIRE WOUND) ETHYLENE COPOLYMER JACKET AND EPDM INSULATION (8 mm) TO BE USED WITH FORD WSS-M99P1111-A 《带电阻芯.pdf

FORD ESE-M1L99-A-2003 IGNITION CABLE HIGH TENSION RESISTANCE CORE (FIBER GLASS) SILICONE JACKET AND INSULATION (8 mm) TO BE USED WITH FORD WSS-M99P1111-A 《带电阻芯(玻璃纤维)硅树脂护套和绝缘层(8 m.pdf

FORD ESE-M1P2-A-2010 PLATING COPPER TO BE USED WITH FORD WSS-M99P1111-A 《电镀铜 与福特WSS-M99P1111-A 一起使用》.pdf

FORD ESE-M1P28-A1-2008 PLATING IMMERSION TIN TO BE USED WITH FORD WSS-M99P1111-A 《电镀浸锡(和FORD WSS-M99P1111-A一起使用)》.pdf

FORD ESE-M1P28-A2-2008 PLATING FLOW-COAT TIN TO BE USED WITH FORD WSS-M99P1111-A 《电镀流涂锡(和FORD WSS-M99P1111-A一起使用)在文件FORD ESE-M1P28-A1上》.pdf