MSZ KGST 935-1978 《锌的镉含量确定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4391-2018 Standard Terminology Relating to The Burning Behavior of Textiles.pdf

ASTM D4391-2018a Standard Terminology Relating to The Burning Behavior of Textiles.pdf

ASTM D4393-2004 Standard Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds《增强软线或织物与橡胶化合物的搭接脱落粘合力的标准试验方法》.pdf

ASTM D4394-2004 Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Rigid Plate Loading Method《用刚性板负荷法测定岩石质量现场变形模数的标准试验方法》.pdf

ASTM D4394-2008 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method《用刚性板负荷法测定岩石质量现场变形模数的标准试验方法》.pdf

ASTM D4394-2017 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method《采用刚性板负荷法测定岩体变形原位模量的标准试验方法》.pdf

ASTM D4395-2004 Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Flexible Plate Loading Method《用挠性板负荷法测定岩石质量现场变形模数的标准试验方法》.pdf

ASTM D4395-2008 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method《用挠性板负荷法测定岩石质量现场变形模数的标准试验方法》.pdf

ASTM D4395-2017 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method《采用挠性板负荷法测定岩体变形原位模量的标准试验方法》.pdf