MSZ MI-05 22 660 3-1972 《MI－05 22 660 3－72 手工涂料稀释》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 32564-3-2004 Production equipment for micro-systems - Terms and definitions - Part 3 Handling storage and transport《微系统用制造设备 术语和定义 第3部分 搬运、储存和运输》.pdf

DIN 32566-2007 Production equipment for microsystems - Specification for an X-Ray Lithography Mask Support Ring《微型系统用生产设备 X射线光刻掩膜支持环用规范》.pdf

DIN 32567-2-2014 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 2 Specimen for tactile .pdf

DIN 32567-3-2014 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 3 Derivation of correct.pdf

DIN 32567-4-2015 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 4 Specimen for optical .pdf

DIN 32567-5-2015 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 5 Derivation of correct.pdf

DIN 3259-2017 Flanged suction strainers with non-return valve《带止回阀的带法兰的吸滤器(脚阀)》.pdf

DIN 326-1-1981 Slotting drills with Morse taper shank dimensions《莫氏锥柄槽铣刀 尺寸》.pdf

DIN 326-2-1990 Slot drills with Morse taper shank technical delivery conditions《莫氏锥柄槽钻 交货技术条件》.pdf