1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. July 2015 Page 1 of 1 NAVISTAR, INC. Engineering Standard Parts NUMBER: ESP-NM-0.0
2、 TITLE: Table of Contents Section NM Balls, Retaining Rings and Bearing Locknuts & Washers Metric Series CURRENT ISSUE DATE: July 2015 WRITTEN/REVIEWED BY: Corporate Technical Standards APPROVED BY: Corporate Technical Standards SUPERSEDES ISSUE OF: October 2001 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION Change Notice: Made VOID. This specification is VOID, and is replaced by MPAPS S-NM-0.0. For questions, contact MaterialsEngineeringN VOID
