1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 1 of 1 NAVISTAR, INC. Material, Parts, and Process Specifications (
2、MPAPS) NUMBER: MPAPS S-N-0.0 Former Designation: ESP-N-0.0 TITLE: Table of Contents Section N Balls, Retaining Rings and Bearing Locknuts & Washers English Series CURRENT REV No.: 1506 DATE: June 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: ESP-N-0.0 -
3、 October 2001 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appro
4、priate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Changed to New MPAPS format. Retaining Rings - Tapered, Reduced Cross Section, and Special retaining Ring (Noun Code 7175) English Series MPAPS S-N-5.101-GS/PL Spiral Retaining Rings (Noun Code 7175) English Series MPAPS S-N-7.101-GS/PL Metal Balls (Noun Code 0460) English Series MPAPS S-N-21.101-GS/PL
