1、 This document is restricted and may not be sent outside International Truck and Engine Corporation or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. Ge32001 International Truck and Engine Corporation For Further information C
2、ontact: Materials Engineering Truck Development and Technology Center 2911 Meyer Rd., Post Office Box 1109, Ft. Wayne, Indiana 46801-1109 Email: MaterialsEngineeringNav-I. AUGUST 2001 Page 1 of 1 INTERNATIONAL TRUCK AND ENGINE CORPORATION TMS (TRUCK MATERIAL SPECIFICATION) NUMBER: TMS-9002 TITLE: Pr
3、e-Paint Treatment, Finished Parts REVISION: C-1 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering DATE VOIDED: April 1981 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. Thi
4、s specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: VOID Reference: File 30-13A Keywords: Pre-Pain
5、t Treatment; Finished Parts This TMS specification, formerly AM-90809, has been voided and replaced by TMS-9005, 9009, and 4502. The following chart is to be used as a cross reference between the original TMS and the new TMS-9009 and the existing TMS-9005 and 4502. TMS-9002 Replaced by Type 1Clas A TMS-909* Clas B TMS-909* Type 2 TMS-905 Type 3Clas A TMS-909* Clas B TMS-4502 *Contact Materials Engineer for proper selection of class per TMS-9009. V O I D
