1、A-A-50537 W 9999974 0303907 333 W I INCH-POUND I A-A-5 05 3 7 September 21, 1992 SUPERCEDES MIL-C-19437B (MC) 12 September 1983 COMMERCIAL ITEM DESCRIPTION CHEST, TOOL: CARPENTER OR COMPANY The Genera Services Administration has authorized the use of this Commercial Item Description. Abstract. This
2、Commercial Item Description (CID) covers one type and size of wooden chest with a removable tray. Salient characteristics. Desiqn. The chest shall consist of a body, lid and removable tray, and shall be equipped with handles and metal hardware. The chest shall also be equipped with a hasp, a staple
3、plate, and suitable corner protection. The finished dimensions of the chest should be 11 inches high by 17.5 inches wide by 34 inches long. The finished dimensions of the tray should be 2 inches high by 15.9 inches wide by 14 inches long. Construction. The construction of the chest and its component
4、 parts shall be of suitable material which will support and permit a - load of approximately 150 pounds of tools to be handcarried. material shall be corrosion and weather resistant. The WorkmanshiD. The tool chest shall be free of burrs, slivers, splinters, rough or sharp edges, and any other defec
5、ts which may affect appearance or serviceability Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to the Commander (PSE-C) Marine Corps Systems Command, Quantico, VA 22134-5080 by using the self addr
6、essed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A FSC 5140 DISTRIBUTION STATEMENT A. Approved for public release; distribu- tion is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without li
7、cense from IHS-,-,- _. A-A-50537 9 9994974 0303908 078 = * - A-A-5 05 3 7 Certification. The contractor shall certify that the product offered meets the salient characteristics of this CID and that the product conforms to the producers own drawings, specifications, standards and quality assurance pr
8、actices, and is the same product offered for sale in the commercial market place. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Recovered materials. The manufacturer
9、 shall utilize recovered material to the maximum extent practicable. Preservation, packasins, p ackins,and markinq. The tool chest shall be preserved, packaged, and packed to a degree of protection to preclude damage to containers and/or the contents thereof under normal shipping conditions, handlin
10、g, etc., involving shipment from the supply source to the receiving activity, and shall conform to the applicable carriers rules and regulations. Intermediate and exterior package quantities and labeling and marking shall be as specified in the contract or order. Civil Aqency Coordinatinq Activity : GSA - FSS Preparing Activity: Navy - MC Project Number: 5140-NO84 Military Interest: Custodian: Air Force - 99 Review Activity: Air Force - 84 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
